 |
|
|
Shop > ACNC > DP-28BF
|
DoorBell Fon™ Door Bell Answering System (Brass)
|
|
|
|
 Enlarge Image
|
|
Bring Convenience, Security & Assistance to your home today with the DOORBELL FON™. This
amazing product allows you to answer a door or gate from any telephone in
your home or business. It installs using a single pair of wire for (power,
control, signaling & voice). All add on component's install on same single
pair. No Programming! No Codes! Just pick up the telephone like a
regular telephone call. |
|
|
|
|
|
|
|
|
|
Features
|
- Available in White (DP-28WT), Ivory (DP-28IT), and Brass (DP-28BF)
- Manufactured in aluminum anodized with a brass finish
- Mounts directly onto a 2-gang masonry box
- Installs using single pair (power, control, signaling, voice).
The distance from Door Box to the Controller may be extended up to 4,000 feet using Cat5E cable.
- Operates two separate entry-ways
- Distinctive ring for each entryway
- Built in call-waiting
Applications
|
- Front/back door
- Driveway Gates
- Remote Entryways
- Delivery Docks
- Marine Docks
- Secured Facilities
- Senior Housing
- Disabled Housing
Operation
Simple, when a visitor presses the button on the door box, the telephones will
ring with a distinctive ring to let you know someone is at the door. Just
simply pick up the telephone and you are automatically connected to that
door. If you are on the telephone and a visitor comes to your door you will
hear a distinctive call-waiting tone. Press the "flash" key or hook switch your
telephone and the built in call-waiting on your DOORBELL FON™ will
switch you to the door and place your outside call on hold. When you are
finished talking to the door just press the "flash" key or hook switch and
connect back to the outside call. When you're done with you call just hang up
your telephone. It is that simple.
Modular Add-on Components:
|
- Outbound Relay Trigger Controller (DP-28SW)
Provides dry contact closure off star (*) key on telephone to operate an electrical device.
- Additional Door Box (DP-28NWT=White, DP-28NIT=Ivory, DP-28NBF=Brass)
Used for additional entryways
- Inbound Relay Trigger Controller (DP-28CI)
Provides dry momentary contact closure from the push button on the door box. Great add on for a door
chime, camera or light.
| Specifications |
| Design | Trim Line Styling |
| Power | 117VA/ 60Hz 0.1 amp 12 watt |
| Output | 17-28 Volt (talking)
75-vrms/25+/- 2Hz (ringing) |
| Construction | Anodized Solid Brass Plate
Environmental Grade Sensor Button
|
| Mounting | Flush Mount (2-gang masonry box) |
| Operating Temperature | -20°F to +120°F
Relative Humidity 90%
Water Drop- .025mm |
|
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
