 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > WGL > RAIN8Y
|
WGL Rain8PC - RS232 Sprinkler Controller - Special Version
|
|
|
|
 Enlarge Image
|
This product has been discontinued.
Modified version of the Rain8 with no maximum default run time. Ideal for orchard irrigation, or any time more than 250 minutes of irrigation is needed.
Includes modified Rain8 X10 sprinkler controller, 24v AC 20va transformer, RS232 cable, and data cable. Required power line interface (TW523 or PSC05) not included
|
|
|
|
|
|
|
Features:
- Turn on or off each of the zone individually
- Turn off all zones on a specific module
- Turn off all zones on all modules
- Get the current status of all zones
- Default run timer for each zone to prevent over watering
Three modules (24 zones)
|
There is a single RS232 connection between the controlling computer and the "master" Rain8. The 24VAC power and network communications are transferred from master to slave-to-slave etc.
The network connection for the slave units is an 8 conductor RJ45. Each slave has a pair of these modular jacks to pass on data and power to the next one in a daisy chain. Each slave also has a RS232 connection that is used only to assign the address during the initial configuration.
|
| The components necessary for an irrigation system of 8 to over 2000 zones are sold separately. View Typical Examples
|
 | The Rain8net, an 8 zone, RS232 sprinkler controller module.
Software configurable as either master unit or slave.
Module only, does not include transformer or cables. View Product |
 | Wall mounted 120vac to 24vac, 20VA power transformer with screw terminals.
Capable of powering 3 three valves at the same time. If more valves need to be operated at the same time, contact us for recommendations. View Product |
 | An RJ11 to DB9, RS232 cable.
Used to configure both master and slave units.
Also used by master to communicate with RS232 controlling PC or other device.
Only one of these cable assemblies required per irrigation system. View Product |
 | 12 inch, 8 conductor cable with RJ45 modular connector both ends.
Required one per slave module.
A standard ethernet cat5 patch cable may be substituted. View Product |
 | Same as above, but 5" long.
Used when modules are stacked like 24 zone photo above, for neater installation. View Product |
 | This 10" x 12" x 4" weatherproof Enclosure for 1 to 5 modules (8 - 40 zones) and the 24vac transformer. View Product |
|
|
Rain8PC Accessory Rain Sensor
Save water and money by getting a rain sensor to inhibit sprinkler operation during and after rain showers.
View Product |
Non-X10 Control, Drip and Orchid Irrigation
Still have not found what you need? WGL has created special versions of the
Rain8 controller for just about every irrigation need. |
Rain8X
|
Special version of the Rain8 controller that allows up to 4 zones to be active at once (very useful for drip irrigation). The Rain8X has no default timer, you must send a X10 OFF to turn off each zone. You must also use the Rain8X in manual
mode -- it has no automatic mode.
Includes modified Rain8 X10 sprinkler controller, 24v AC 20va transformer, RS232 cable, and data cable.
Required power line interface (TW523 or PSC05)
not included |
Rain8Y
|
Modified version of the Rain8 with no maximum default run time. Ideal for orchard irrigation, or any time more than 250 minutes of irrigation is needed.
Includes modified Rain8 X10 sprinkler controller, 24v AC 20va transformer, RS232 cable, and data cable.
Required power line interface (TW523 or PSC05)
not included |
Rain8Z
|
Special version of the Rain8 controller that provides 5v DC at the terminal strip for any kind of control application. Modified to allow all 8 zones (outputs) to be active at once. The Rain8Z has no default timer, you must send a X10 OFF to
turn off each zone. You must also use the Rain8Z in manual mode -- it has no automatic mode.
Includes modified Rain8 X10 sprinkler controller, 24v AC 20va transformer, RS232 cable, and data cable.
Required power line interface (TW523 or PSC05)
not included
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
