|
|
Leviton Passive Infrared Motion Detector / X10 Transmitter
Leviton Passive Infrared Motion Detector / X10 Transmitter. Monitors a 4000 sq. ft. field 110 degrees wide up to 40 feet in front of the unit. When detects motion sends ON signals to X10 Receiver Modules set to control lights at four sequential system addresses.
|
|
Optex Multi Stabilized Outdoor Passive Infrared Detector
Suitable for almost all outdoor applications because it combines two PIRs, creating extra high immunity against false alarms caused by small animals, cars, and other outdoor disturbances. Available in 3 Versions: standard, battery operated, and voice recording / warning.
|
|
 |
|
|
Optex Twin Beam Photoelectric Detectors - AX-70TN
Outdoor 70 foot range. Indoor 165 foot range. Two beams of pulsed infrared energy provide reliable operation despite as much as 99% blockage of beam energy caused by heavy rain, dust storm, fog, or falling snow.
|
|
Optex Twin Beam Photoelectric Detectors
Outdoor 130 foot range. Indoor 330 foot range. Two beams of pulsed infrared energy provide reliable operation despite as much as 99% blockage of beam energy caused by heavy rain, dust storm, fog, or falling snow.
|
|
|
|
|
|
Optex Indoor/Outdoor Sensor Transmitter
For use with the Wireless Indoor/Outdoor Chime System. Operates on 9V alkaline battery and sends radio signal when it detects a person or car. Microprocessor based infrared motion detector adjusts easily to 17' Fan shaped or 50' Long Range detection area.
|
|
|
|
|
Optex Chime Box Receiver with Relay
For use with the Wireless Indoor/Outdoor Chime System. Operates on AC adapter and plugs in anywhere. 3 different chime tones and 1 continuous tone for easy identification of transmitter. Volume control and ON/OFF switch for easy operation.
|
|
X-10 Pro Eagle Eye Indoor / Outdoor Occupancy Sensor
Indoor / Outdoor Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. Transceiver passes signals onto house wiring for controlling X10 receivers such as lamp and appliance modules, chimes, and light switches.
|
|
|
X10 PRO PIR Wireless Motion Detector
Sends RF transmission to main console of X-10 PRO Security Systems. Built in sensitivity switch for single or double catch mode. Comes with mounting bracket. Requires 4 AA batteries.
|
|
Sure Action Enhanced Pulsor
Motion/presence detection device that responds to the physical flexing of the material on which it's mounted (i.e., floor joists, cantilever decking, roof rafters, etc.). Also available in 6-Pack and 12-Pack.
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
