 |
|
|
Shop > X-10 Pro > PAT01
|
X10 Pro Transceiver Module
|
|
|
|
 Enlarge Image
|
Converts Radio Frequency signals from the PHR04 , PUR09 , PHW04D, and PHR03 to X10 control signals. Plugs into a standard 110Volt outlet. 100' range.
The Transceiver Module works in conjunction with a handheld wireless remote controller such as the X-10 PRO 16-Plus Remote (PHRO3) to control lights and appliances from up to loft away, even through walls. As well as its built-in switched outlet, the Transceiver Module controls up to 15 additional X-10 modules via the powerline. The transceiver Module can also be controlled by other X-10 powerline controllers such as the X-10 PRO Mini Controller (PHC01).
|
|
|
|
|
|
|
|
|
The Transceiver Module is designed to control loads with the following ratings:
- Resistive load: 15 A
- Motor load: l/3 HP
- Incandescent load: 500W
- TV/Stereo: 400W
|
- Set the Transceiver's House Code dial to match the House Code on the remote controller that will be used with it.
- Set the UNIT slide switch to 1-8 to control the built in outlet from a transmitter or controller sending a command to unit 1, or 9-16 to control the built in outlet with control 9. Either position allows control of all 16 unit numbers from the X-10 PRO 16-Plus Remote Control (PHR03).
- Plug a lamp or appliance into the Transceiver Module and plug the Transceiver Module into a convenient AC outlet.
Local control
An ON-OFF button is provided on the Transceiver Module which toggles the output, of the built-in switched outlet, from ON to OFF and vice versa when pressed.
|
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
