| Specifications |
| Power Supply | 3v (2 x AA) |
| Battery Run Time | One Year |
| Output | 1mV |
| RF Frequency | 310 Mhz |
| RF Range | 100 feet |
| 65,536 unique codes |
|
|
Installing the Door/Window Sensor
|
- Attach the Door window sensor to the wall using tie mounting screws provided.
- Fit the Door/Window sensor as high as possible at The top of the door/window.
- Make sure the arrows - the magnetic switch halves are facing each other so that they separate cleanly when the door or window is opened.
- Set the DELAY slider switch to MIN to always trigger the alarm instantly, or to MAX to trigger the alarm after a preset entry delay when the system is armed in DELAY mode.
Registering the Door/Window Sensor with the Security Console
|
- Fit two AA Alkaline batteries in the battery compartment.
- Press and hold the TEST button for about a second, the LED flashes twice when you release it. This confirms it has generated a new security code.
- Set the slider switch on the Security Console to INSTALL.
- Press the TEST button on the Door window sensor. The console beeps once to confirm and the next available zone LED lights.
- Return the console slider switch to the RUN1 or RUN2 position.
Testing the Door/Window sensor
|
- Set the slider switch on the security console to RUN2.
- Open the door or window with the sensor attached. The console beeps to acknowledge and the zone LED lights.
Note: As with all RF transmitter devices; electrical fields, metal doors or door/window frames
and appliances can cause interference that can decrease the strength of the transmitted signal.
Re-orienting the transmitter or receiver console may increase your ability to send and receive
the necessary signals.
|
The Smartest DIY Home Improvements
