 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > Leviton > HCM06-1SW
|
Leviton DHC 600-Watt Scene-Capable Dimming Wall Switch Receiver
|
|
|
|
 Enlarge Image
|
With One-Button Programming through address capturing. Single-pole (one location) or 3-way (multi-location) applications. Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Rated: 120V 60Hz, 600W Incandescent, 600VA (450W) Magnetic Low-Voltage Lighting. As with every dimmer, derating for multiple gang installations is required. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.
Equipped with Leviton's exclusive Intellisense™ Technology for the utmost in reliability, even where electrical "noise" exists on the power line.
|
|
|
|
|
|
|
|
Features
|
- Manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats.
- Scene Control capability when used with DHC Scene Controller HXC7S-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers.
- Multi-station manual and remote ON/OFF switching and full range dimming when used with MS00R-10 Multi-Remote Switch.
- Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
- Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON
- Protected memory maintains light levels during minor power fluctuations
- Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
- Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
- Double tap to top of rocker switch brings light to full output without affecting preset levels
- Neutral connection should be used whenever possible but not required for incandescent loads.
- True Decora-style operationypush top of rocker to brighten; bottom to dim
- Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)
- True Decora styling coordinates with Leviton's Decora line of designer-wiring devices
- All devices are UL Listed (File #E313173), CSA Certified (File #LR 3413) and NOM Certified (#057)
- Backed by a Limited Two-Year Warranty
Note:
An HCA02-10E DHC System Amplifier Module must be installed in all panels in every DHC installation to ensure adequate signal strength.
Use with Leviton DPSPE-112 Power Extender to extend120V load capacity to 2000W/2000VA for incandescent, magnetic low-voltage and 120V Advance Mark X™, Mark VII™, and OSRAM Sylvania Quicktronic® Helios™fluorescent dimming ballasts.
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
