 |
|
|
Shop > Leviton > HCM10-1DW
|
Leviton DHC 1000-Watt Scene-Capable Dimming Wall Switch Receiver
|
|
|
|
 Enlarge Image
|
With One-Button Programming, LED Locator, and Brightness Display. Single-pole (one location) or 3-way (multi-location) applications. Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Rated: 120V 60Hz, 1000W Incandescent, 1000VA (750W) Magnetic Low-Voltage Lighting. As with every dimmer, derating for multiple gang installations is required. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.
Equipped with Leviton's exclusive Intellisense™ Technology for the utmost in reliability, even where electrical "noise" exists on the power line.
|
|
|
|
|
|
|
Features
- One-button programming through address capturing.
- Manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats.
- Scene Control capability when used with DHC Scene Controller HXC7S-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers.
- Multi-station manual and remote ON/OFF switching and full range dimming when used with MS00R-10 Multi-Remote switch.
- Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life
- Square green LED display alongside rocker indicates selected brightness level
- Locator LED illuminates when lights are OFF
- Fit in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control
- Protected memory maintains light levels during minor power fluctuations
- Features Leviton's Intellisenseâ„¢ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise
- Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means
- Double tap to top of rocker switch brings light to full output without affecting preset levels
- Neutral connection should be used whenever possible but not required for incandescent loads.
- True Decora-style operationypush top of rocker to brighten; bottom to dim
- Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module)
- True Decora styling coordinates with Leviton's Decora line of designer-wiring devices
- All devices are UL Listed (File #E313173), CSA Certified (File #LR 3413) and NOM Certified (#057)
- Backed by a Limited Two-Year Warranty
Note:
An HCA02-10E DHC System Amplifier Module must be installed in all panels in every DHC installation to ensure adequate signal strength.
Use with Leviton DPSPE-112 Power Extender to extend120V load capacity to 2000W/2000VA for incandescent, magnetic low-voltage and 120V Advance Mark X™, Mark VII™, and OSRAM Sylvania Quicktronic® Helios™ fluorescent dimming ballasts.
|
Color Change Kits for HCM06-1DW and HCM10-1DW |
| White |
Ivory |
Almond |
Gray |
Black |
| DRKDD-1LW |
DRKDD-1LI |
DRKDD-1LA |
DRKDD-1LG |
DRKDD-1LE |
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
