The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

Is price a major
factor for you?
We offer a large selection of discounted open-box items in our Clearance Section. These items are backed by our own warranties, so you have nothing to lose!

See Products»

Shop > PC Home Automation Controllers - Hardware and Software > HomeSeer Comprehensive Home Automation Software > CR234

ACT Split-Single Phase Coupler Repeater

Enlarge Image

Applications:
Repeats X10 & A10 powerline carrier transmission signal on both phases of a 120/240 VAC split-single phase power system, when it is heard on one phase or on the Signal Carrying Conductor (SCC).

Item # CR234

$142.95

Shipping Rates
Free Technical Support
Low Prices Guaranteed!

Availability:

Item is Available

Display All:

ACT

Description:
The CR234 is an A10 enhanced powerline carrier coupler repeater for distributing Powerline Control signals to all phases of power. CR234 has DIP switches that enable the user to customize its operation depending on the application. CR234's grey painted enclosure is designed to mount on a 4-11/16" by 4-11/16" electrical box. LED's in the cover indicate operation modes.

Features:

Mounts easily on a 4-11/16" x 4-11/16" electrical box
X10 Signal and SCC (Signal Carrying Conductor) Compatible
Status LED's visible on Cover
Internal Screw terminals for wiring connections
Fuse Protected
Improved receive signal response, higher signal output
Internal DIP switches can select special features such as:
- Priority SCC - Will allow Signal Carrying Conductor signal to take priority over any other code being received.
- Receive at 0° or 30° - Either one.
- Repeat or Ignore Repeated Signal - "Repeat repeated" enabled repeats all signals including those from other repeaters. "Ignore Repeated" repeats all signals except those from another repeater.
- Handles Preset Dim Commands
- X10 Extended Code 1/ACT Extended Code - Can accept either, one at a time.
- Repeat on ALL Active Phases/Repeat on SCC only
- Window Normal/Window Sensitive - Shifting the sine wave to the window sensitive mode can improve reception in selected installations.

Specifications
Electrical Requirements
Power
Supply Voltage	120 VAC, +/-10% (Phase A to neutral)
Fuses (field replaceable)	Phase A: 5x20mm, 750 mA, 250V, Time Lag Phase B: 5x20mm, 500 mA, 250V, Time Lag
Signal Input	X10 Powerline Carrier on any phase, Signal Carrying Conductor (SCC), both sensitive to 25 millivolts
Signal Output	X10 Powerline Carrier (including SCC), 5V peak to peak @ 5 ohms
Mechanical Requirements
Mechanical Connection	Four (4) Quick Fit 0.25" spade terminals installed in tri-barrier terminal block under screw clamp connections. Provided: Four (4) female quick disconnect wire connectors for 14 to 16 AWG wire.
SCC Connections	Plug-in terminal block
SCC Wire Size	12 to 22 AWG
SCC Wire Strip Length	5/16"
Dimensions (Enclosure)	4.75" L x 4.75" W x 2.0" H
Weight	Less than 16 ounces
Mounting	Hinges/mounts on 4-11/16" x 4-11/16" electrical junction box
Environmental Requirements
Operating Temperature Range	32 to 120° F (0 to 49°C)
Storage Temperature Range	-40 to 185° F (-29 to 66°C)
Operating Humidity Range	10% to 95% non-condensing