 |
|
|
Shop > ACT > CR244
|
ACT Split-Single Phase Coupler Repeater
|
|
|
|
 Enlarge Image
|
Applications:
CR244 Repeats X10 & A10 powerline carrier transmission signal on all phases of a 240/415 VAC 50 Hz three phase power
system, when it is heard on one phase or on the Signal Carrying Conductor (SCC).
|
|
|
|
|
|
|
Description:
The CR244 is an A10 enhanced powerline carrier
coupler repeater for distributing Powerline Control
signals to all phases of power. It has DIP switches
that enable the user to customize its operation
depending on the application.
CR244 is housed in a grey painted enclosure that
is designed to mount on a 4-11/16" by 4-11/16"
electrical box. LED's in the cover indicate operation
modes.
Features:
|
- Designed to mount on a 4-11/16" x 4-11/16" electrical box
- X10 Signal and SCC (Signal Carrying Conductor) Compatible
Smart SCC - Always enabled. Does not repeat SCC signals
received on the SCC line.
- Status LED's visible on Cover
- Internal Screw terminals for wiring connections
- Fuse Protected
- Improved receive signal response, higher signal output
- Internal DIP switches can select special features such as:
- Priority SCC - Will allow Signal Carrying Conductor signal to take priority over any other code being received.
- Receive at 0O or 30O - Either one.
- Repeat or Ignore Repeated Signal - "Repeat repeated" enabled repeats all signals including those from other
repeaters. "Ignore Repeated" repeats all signals except those from another repeater.
- X10 Extended Code/ACT Extended Code - Can accept either, one at a time.
- Repeat on ALL Active Phases/Repeat on SCC only
- Window Normal/Window Sensitive - Shifting the sine wave to the window sensitive mode can improve
reception in selected installations.
| Specifications |
| Electrical Requirements |
| Power |
| Supply Voltage | 240 VAC, +/-10% |
| Fuses (field replaceable) | Phase A: 5x15mm, 750 mA, 350V, Time Lag
Phase B: 5x15mm, 500mA, 350V, Time Lag
Phase C: 5x15mm, 500mA, 350V, Time Lag |
| Signal Input | X10 Powerline Carrier on any phase, Signal Carrying Conductor (SCC), both sensitive to 25 millivolts |
| Signal Output | X10 Powerline Carrier (including SCC), 5V peak to peak @ 5 ohms |
| Mechanical Requirements |
| Mechanical Connection | Four (4) Quick Fit 0.25" spade terminals installed in tri-barrier terminal block under screw clamp connections.
Provided: Four (4) female quick disconnect wire connectors for 14 to 16 AWG wire. |
| SCC Connections | Plug-in terminal block |
| SCC Wire Size | 12 to 22 AWG |
| SCC Wire Strip Length | 5/16" |
| Dimensions (Enclosure) | 4.75" L x 4.75" W x 2.0" H |
| Weight | Less than 16 ounces |
| Mounting | Hinges/mounts on 4-11/16" x 4-11/16" electrical junction box |
| Environmental Requirements |
| Operating Temperature Range | 32 to 120° F (0 to 49°C) |
| Storage Temperature Range | -40 to 185° F (-29 to 66°C) |
| Operating Humidity Range | 10% to 95% non-condensing |
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
Cent-a-Meter 'electricity speedometer' helps you save energy & money!
