 |
Easily put the Smart into your Home
UPB Switches:
The most reliable, customizable, and easy-to-install Power Line Automation switches ever made. ZERO New Wires Required!
|
Only $79.95
|
View All Switches ยป
|
|
|
|
Shop > ACT > CR254
|
ACT Split-Single Phase with High Leg Delta Coupler Repeater
|
|
|
|
 Enlarge Image
|
Applications:
Repeats X10 & A10 powerline carrier transmission signal on all phases of a 120/240 VAC split-single phase with High Leg
Delta power system, when it is heard on one phase or on the Signal Carrying Conductor (SCC).
|
|
|
|
|
|
|
Description:
The CR254 is an A10 enhanced powerline carrier coupler repeater for distributing Powerline Control
signals to all phases of power. CR254 has DIP
switches that enable the user to customize their
operation depending on the application.
CR254's grey painted enclosure is designed to
mount on a 4-11/16" by 4-11/16" electrical box.
LED's in the cover indicate operation modes.
Features:
|
- Mounts easily on a 4-11/16" x 4-11/16" electrical box
- X10 Signal and SCC (Signal Carrying Conductor) Compatible
- Status LED's visible on Cover
- Internal Screw terminals for wiring connections
- Fuse Protected
- Improved receive signal response, higher signal output
- Internal DIP switches can select special features such as:
- Priority SCC - Will allow Signal Carrying Conductor signal to take priority over any other code being
received.
- Receive at 0O or 30O
- Repeat or Ignore Repeated Signal - "Repeat repeated" enabled repeats all signals including those from
other repeaters. "Ignore Repeated" repeats all signals except those from another repeater.
- Accepts X10 Extended Code or ACT Extended Code
- Repeat on ALL Active Phases or Repeat on SCC only
- Window Normal/Window Sensitive - Shifting the sine wave to the window sensitive mode can
improve reception in selected installations.
| Specifications |
| Electrical Requirements |
| Power |
| Supply Voltage | 120/240 VAC, +/-10%, split single phase with high leg delta |
| Fuses (field replaceable) | Phase A: 5x20mm, 750mA, 250V, time lag
Phase B: 5x20mm, 500mA, 250V, time lag
High Leg Phase: 5x20mm, 500mA, 250V, time lag |
| Signal Input | X10 Powerline Carrier on any phase, Signal Carrying Conductor (SCC), both sensitive to 25 millivolts |
| Signal Output | X10 Powerline Carrier (including SCC), 5V peak to peak @ 5 ohms |
| Mechanical Requirements |
| Mechanical Connection | Four (4) Quick Fit 0.25" spade terminals installed in tri-barrier terminal block under screw clamp connections.
Provided: Four (4) female quick disconnect wire connectors for 14 to 16 AWG wire. |
| SCC Connections | Plug-in terminal block |
| SCC Wire Size | 12 to 22 AWG |
| SCC Wire Strip Length | 5/16" |
| Dimensions (Enclosure) | 4.75" L x 4.75" W x 2.0" H |
| Weight | Less than 16 ounces |
| Mounting | Hinges/mounts on 4-11/16" x 4-11/16" electrical junction box |
| Environmental Requirements |
| Operating Temperature Range | 32 to 120° F (0 to 49°C) |
| Storage Temperature Range | -40 to 185° F (-29 to 66°C) |
| Operating Humidity Range | 10% to 95% non-condensing |
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
