The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

Bring all your rechargeable batteries to SmartHomeUSA for free recycling under the call2Recycle program:

10 Lawrence Ave
2nd Floor
Smithtown, NY 11787
Mon - Fri, 9AM - 5PM
631-361-3600

Shop > ACT > RB204

ACT Box Mount Receiver, Controllable Form C Relay

Enlarge Image

X10/A10. Rated 240 VAC, 50/60 Hz, 30A.

Applications:

Remote ON/OFF Control of Water Heaters
Remote ON/OFF control of HVAC and Unitary Equipment
Fail-safe Units "OFF" after power failure (use N.O. contacts)
Fail-safe Units "ON" after power failure (use N.C. contacts)
Control High Current Loads
Alternate Loads
Control Parking Lot Lights

Item # RB204

$49.95

Shipping Rates
Free Technical Support
Low Prices Guaranteed!

Availability:

Item is Available

Display All:

ACT

Description:
The RB204 Unit is an A10 enhanced 240 VAC, 50/60 Hz, powerline carrier receiver controlling a single Form C Relay, capable of switching a 30 amp load.

Features:

Easy Push Button Programming to:
- Set response to "All Lights On" Command
- Set response to "All Units Off" Command
- Set response to "All Lights Off" Command
- Set response to Status Request
- To select 1-16 hours to "Time Out" Relay
X10 Signal Compatible
On/Off/Auto Switch on Cover
Terminals inside for connection of remote override switch
One Form C Electrically Held Relay

Specifications
Electrical Requirements
Power
Supply Voltage	240 VAC, +/-10%
Frequency	50 or 60 Hz
Power Consumption	Less than 4.5W
Signal
Signal Input	X10 Powerline Carrier, sensitive to 50 millivolts
Signal Output (Status Feedback)	X10 Powerline Carrier, 6V peak to peak @ 5 ohms
Controlled Output
Form C Relay	Normally open, normally closed and common connections
Resistive	30A, 277 VAC - N.C. or N.O. contacts
Motor	1 H.P., 120 VAC or 1.5 H.P. 200 -600 VAC - N.C. or N.O. contacts
Ballast	120 VAC, 10A - N.C. contact or 30A - N.O. contact 277 VAC, 10A - N.C. contact or 20A - N.O. contact
Tungsten	2A, 120 VAC - N.C. contact or 10A, 120 VAC - N.O. contact
Resistive DC	30A, 28 VDC, - N.C. or N. O. contacts
Fuse	One (1) 13 x 32mm fast acting fuse rated 0.5A, 600V (control circuit)
Mechanical Requirements
Power
Two (2) 12" 16 AWG Flying Leads	L1 - Black L2 - Red N - White
Relay
Three (3) 12" 10 AWG Flying Leads	N.C. - Blue N.O. - Gray COM - Violet
Remote Manual Override
Connections	Removable Terminal Block with Screw Clamp Connections
Tightening Torque	16 inch-pounds
Wire Size	8 to 18 AWG
Wire Strip Length	5/16"
Enclosure
Dimensions	4.8" L x 4.6" W x 1.25" H
Weight	Less than 16 ounces
Mounting	Hinges/mounts on 4-11/16" x 4-11/16" electrical junction box
Environmental Requirements
Operating Temperature	32 to 120 degrees F
Storage Temperature	-20 to 150 degrees F
Operating Humidity	5% to 95% non-condensing