 |
|
|
Shop > ACT > RD134
|
A10, 120 VAC, 300W, Single Inductive Wall Mounted Dimmer Switch
|
|
|
|
 Enlarge Image
|
The RD134 is an A10 enhanced powerline carrier
dimming receiver. The RD134 responds to ON,
OFF, BRIGHT, DIM, and can be configured to
respond to ALL LIGHTS ON, ALL LIGHTS OFF,
ALL UNITS OFF, and STATUS REQUEST. Dimmer
remembers last dim level for correct status
report and restoration of dim level upon power up.
Dimmer can also be configured to respond immediately to ALL LIGHTS ON and ALL UNITS OFF.
The RD134 is programmable to any of the 256
addresses, and for up to 64 relative scenes and 4
global scenes. The fade rate of the dimmer can be
programmed from immediate to 271 seconds over
the entire dimming range, with 3.12 seconds being
the default setting.
|
|
|
|
|
|
|
Features:
- A10 Technology
- Supports Two way communication
- Easily addressable
- Supports and Remembers Scenes
- Supports Standard Code On, Off, Bright, Dim commands
- Supports Immediate On commands
- Supports multiple dim rate operation
- Supports multiple dim rate local control
- Remembers state
- Soft start
- Configurable to disable Soft Start
- Configurable to support Standard Code Preset Dim commands
- Supports All Type 3 Extended Code commands including Group Off and Group Dim.
- Configurable to support X10 Implementation of Type 3 commands
- Configurable to support All Lights On, All Lights Off, All Units Off commands.
- Configurable to respond immediately to All Lights On, All Units Off (instead of soft start)
- Configurable Unit Code or No Unit code Status Response
- Configurable Minimum Level (When turned on from the off state)
- Configurable to respond to Status On, Status Off commands as On, Off commands.
- Configurable dim rate
- Reversible LED indication
- 50/60 Hertz operation
- Available in White, Ivory and Almond (special order)
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
