 |
|
|
Shop > ACT > RD161
|
X10 / A10 120VAC, 500W, SP, 3-Way or Single Inductive Dimmer
|
|
|
|
 Enlarge Image
|
Looking for an easy way to automate low-voltage lighting and motor loads such as ceiling fans? You've found it. This inductive dimmer switch gives you the power to control low-voltage lights, ceiling fans and other inductive devices locally at the switch or remotely from any X10 transmitter.
|
|
|
|
|
|
|
What makes this switch unique is that in addition to dimming lights, the DIM/BRIGHT feature also lets you adjust the speed of ceiling fans and other motor-controlled devices in up to 16 steps. Now when the temperature in the room goes up (or down), you can adjust the speed of your ceiling fan from any X10 transmitter without getting up from your seat.
The Inductive Wall Dimmer Switch is ready for three or four-way circuits. A 3-way circuit requires one Inductive Dimmer Switch and one slave switch. A 4-way circuit would require a total of two 2 slave switches. Simply add additional slave switches for 5, 6 or more way circuits. For single pole applications, just cap off the red traveler wire. Please note that you must use the slave switches below, existing 3 or 4 way mechanical switches will damage the dimmer.
Switches come complete with interchangeable white/ivory paddle switch covers. Trim plates not included. Not for use with fluorescent lights.
Order now and easily expand your home automation system with local and remote control of ceiling fans, low-voltage motors, low-voltage lights and more.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
