The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

What is Home Automation?

Find out!
Home Automation Defined

Shop > ACT > RF314

ACT Isolated Contact Relay Fixture Receiver

Enlarge Image

This product has been discontinued.

X10/A10. Rated 20A, 277 VAC.

Applications:

Control High Current Loads
To alternate loads
Remote ON/OFF control of HVAC and Unitary Equipment
Control Parking Lot Lights
Control Lighting Circuits
Switch any voltage up to 305 VAC

Item # RF314

Shipping Rates
Free Technical Support
Low Prices Guaranteed!

Availability:

Item is Discontinued

Display All:

ACT

Description:
The RF114, RF214 and RF314 units are A10 enhanced powerline carrier receivers controlling a single internal isolated contact form A latching relay. Relay holds last commanded state on power loss, and A10 circuitry remembers last relay state for correct status report upon power loss. LED on face for guide in programming also indicates status and power. The RF series of receivers are programmable to any of the 256 X-10 addresses.

Features:

One latching 20 Amp Isolated Contact Form A Relay with manual override and mechanical status indicator - holds last state on power loss.
Advanced A10 circuitry, X-10 Signal Compatible
Easy Push Button Programming for Unit Address and:
- Response to "All Lights On" Command
- Response to "All Units Off" Command
- Response to "All Lights Off" Command
- Response to "Status Request"
- Enable or disable "Polite Mode"
Two way powerline communication, reports relay status upon "Status Request"
Flying leads for field connection

Specifications

Electrical Requirements

Power

Supply Voltage +/-10%

RF114: 120 VAC
RF214: 208/240 VAC
RF314: 277 VAC

Frequency

50 or 60 Hz

Power Consumption

Less than 4.5W

Fuse (power to relay control circuit only)

One (1) 5mm fuse rated 0.5A for control circuit (factory replaceable only)

Signal

Signal Input

X10 Powerline Carrier, sensitive to 25 millivolts

Signal Output (Status Feedback)

X10 Powerline Carrier, 6V peak to peak @ 5 ohms

Controlled Output

Form A Latching Relay

With mechanical override and status indicator

Maximum switching power

5000 VA

Maximum switching voltage

305 VAC (all models)

Maximum switch current

20 Amps

Relay Life Cycles at Listed Loads

Load Type	100,000 Operations	30,000 Operations
Incandescent Lamp	1250W	2500W
Fluorescent Lamp	1200W	2500W
Low Voltage Halogen w/ transformer	500VA	500VA
HID Lamp	1000W	2000W

Mechanical Requirements

Dimensions

2.7" L x 1.75" W x 1.6" H

Weight

Less than 16 ounces

Mounting

Double sided foam tape for attachment in electrical junction box

Connections

Flying Leads. LINE or L1 -16 AWG, LOAD (2) -12 AWG, NEUTRAL or L2 -16 AWG

Environmental Requirements

Operating Temperature

32 to 120 degrees F

Operating Humidity

5% to 95% non-condensing