 |
|
|
Shop > ACT > RF324
|
ACT Isolated Contact A10 / X10 Fixture Module, 277V AC 20A
|
|
|
|
 Enlarge Image
|
This RF324 unit is an A10 / X10 enhanced powerline carrier receiver, controlling a single internal isolated contact form A relay. It is programmable to any of the 256 X10 standard or Extended X10 addresses, and may be remote controlled by addressing its base address, its sub address, or through groups by the commands ALL LIGHTS ON, ALL LIGHTS OFF, or ALL UNITS OFF. These global commands must be configured. The relay will hold the last commanded state on power loss, and the A10 circuitry remembers last relay state for correct status report. The RF324 will transmit the current relay status when requested (2-way communication). The LED on the face is a guide in programming and also indicates status and power. Manufactured under Advanced Control Technologies, Inc.’s U.S. Patent No. 6,229,432.
|
|
|
|
|
|
|
Applications:
- Control High Current Loads
- Remote ON/OFF control of HVAC and Unitary Equipment
- Control Parking Lot Lights
- Control Lighting Circuits
- Switch any voltage up to 305 VAC
Features:
- X10 Standard Code (256 Addresses) and X10 compatible Extended Addressing capability (4096 addresses)
- Two way powerline communication, reports status upon "Status Request" for standard or extended addresses
- One 20 Amp Form A Relay with push button manual override and LED status indicator - remembers last state on power loss.
- Easy Push Button Configuring for Standard Unit Address
- ON/OFF, responds to "All Lights On", "All Units Off", "All Lights Off".
- Command Enable or disable "Polite Mode"
- Factory or Field Configuring for Extended Unit Address ON/OFF and: Response to "Status Request"
- Advanced A10 circuitry, X10 Signal Compatible
- Flying leads for field connection
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
