 |

Easily put the Smart into your Home
UPB Switches:
The most reliable, customizable, and easy-to-install Power Line Automation switches ever made. ZERO New Wires Required!
|
Only $79.95
|
View All Switches »
|
|
|
 |
Shop > ACT > RS214W
|
ACT X10/A10 Single Feed-thru Switch, White Rocker Style, 240VAC, 20A
|
|
|
|
Enlarge Image
|
The RS214 is an X10 and A10 enhanced powerline carrier in-wall switch receiver, controlling a single internal form A latching relay which can switch up to 264V AC at 20 amps. It may be remote controlled specifically by its address, or through groups by the commands ALL LIGHTS ON, ALL LIGHTS OFF, or ALL UNITS OFF. These global commands must be configured. When the RS214 local push-button is activated, it will transmit the corresponding Status Reply two seconds later. A status LED verifies power to unit, and guides a simple configuring procedure. The LED on the face is a guide in configuring and also indicates status and power. The RS214 can be configured to any of the standard 256 individual X10 addresses. Manufactured under Advanced Control Technologies, Inc.’s U.S. Patent No. 6,229,432. For more information, see the manuals tab below.
|
|
|
|
|
|
Features:
- Advanced A10 circuitry, X10 Signal Compatible
- X10 Standard Code (256 Addresses) and X10 compatible
- Extended Addressing capability (4096 addresses)
- Two way powerline communication, reports status upon "Status Request"
- Automatically updates transmitters with same address
- Equipped with a 20A Form A relay
- Easy Push Button Configuring for Standard Unit Address
- Supports ON/OFF, "All Lights On", "All Units On", and "All Lights Off" commands
- Enabling or disabling "Polite Mode"
- Set LED to be "ON" (direct acting) or "OFF" (reverse acting) when load is off
- Can be controlled from remote location by another similar addressed transmitter
- Provides remote ON/OFF control of lighting or any electrical load
|
|
|
|
|
|
 |
 |
|