The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

Shop > ACT > TB134

ACT 6 Channel Dry Contact Interface Transmitter

Enlarge Image

Standard and Extended Addressing (120 VAC)

Applications:

Allows any standard Building Automation System to control Powerline Carrier receivers.
Allows sensors, thermostats, light level sensors to control powerline receivers ON or OFF via power wiring. Example: One light level sensor can control all building exterior lighting even if the lighting is on multiple separate circuits.

Item # TB134

Select Options:

$39.95

Low Prices Guaranteed!
Free Technical Support
Shipping Rates

Availability:

Item is Available

Display All:

ACT

Description:
The TB134, TB234 and TB334 are A10 enhanced PCC transmitters that accept up to six dry contact inputs and transmit six unique powerline carrier addresses. Each of the six contact wire inputs corresponds to a standard code address (256 available) or extended code addresses (4,096 available). The addresses are configured by the user. Whether an OFF or an ON code is transmitted on contact closure will depend on which of two additional control wires is connected to the input contact. The TB transmitter can be push-button configured for inputs to be momentary or maintained. Output transmission is always polite.

Features:

X10 Standard Code (256 Addresses) and X10 compatible Extended Addressing capability (4096 addresses) Factory or field configuring for Extended Unit Addressing
Two way powerline communication, transmits "Status Request" for standard or extended addresses "Status Request" can be disabled in Configuration mode
Advanced A10 circuitry, X10 Signal Compatible
Converts six dry contacts into six unique Powerline Carrier ON/OFF Commands (any six of 256)
Push button configurable for momentary or maintained contacts (factory default is maintained)
Transmissions are always polite
Fits in standard wall or handy box

Specifications
Electrical Requirements
Supply Voltage +/-10%	TB134: 120 VAC TB234: 208/240 VAC TB334: 277 VAC
Frequency	50 or 60 Hz
Power Consumption	200 mA maximum
Control Input	Six Dry Contact Inputs @ 10K ohms maximum contact resistance
Signal Output	6V peak to peak with a 5 ohm load
Mechanical Requirements
Power Connections (TB134 - 120V)	AWG # 18 flying leads, 600V stranded wire Line (50/60 Hz) - BLACK Neutral (50/60 Hz) - WHITE
Power Connections (TB334 - 277V)	AWG # 18 flying leads, 600V stranded wire Line - (50/60 Hz) BLACK Neutral (50/60 Hz) - WHITE
Digital Input Connections (120 and 277V)	AWG # 18 flying leads: 300V stranded wire Input 1 - Brown Input 2 - Red Input 3 - Orange Input 4 - Yellow Input 5 - Blue Input 6 - Violet Control On - White with Red Stripe Control Off - White with Orange Stripe
Power Connections (TB234 - 208/240V)	AWG # 18 flying leads, 600V stranded wire L1 or Neutral (50/60 Hz) - BLACK L2 (50/60 Hz) - RED
Digital Input Connections (208/240V)	AWG # 18 flying leads: 300V stranded wire Input 1 - Brown Input 2 - Grey Input 3 - Orange Input 4 - Yellow Input 5 - Blue Input 6 - Violet Control On - White with Red Stripe Control Off - White with Orange Stripe
Dimensions	4.10" L x 1.8" W x 1.40" H
Weight	8 ounces
Mounting	Suitable for 2" x 4" wall or handy box
Environmental Requirements
Operating Temperature	32 to 120 degrees F
Storage Temperature	-20 to 150 degrees F
Operating Humidity	5% to 95% non-condensing