The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

Motorola Homesight:
Everything you need to install a do-it-yourself home monitoring system for security, protection, and convenience.

Only $98.95!

Read More

View Video Demo »

Shop > ACT > TI103-RS232

ACT RS232 to A10 Powerline Carrier

Enlarge Image

Application:

Allows any computer to control powerline receivers

Description:
The TI103-RS232 is a power line carrier transceiver with an RS232 serial communications cable to connect to any IBM compatible computer. The standard model is available in 9600/19200 baud (switch selectable) or a Version 2 model in 2400/ 4800 baud (switch selectable).

Item # TI103-RS232

Select Options:

$48.95

Shipping Rates
Free Technical Support
Low Prices Guaranteed!

Availability:

Item is Available

Display All:

ACT

A building automation system or any PC can use the TI103-RS232 to monitor and control X10, ACT or Leviton wireless control modules. It can receive and transmit standard X10 and ACT extended control protocols. Transmit commands and received data is pre-formatted in ASCII such as A1 ON, B3 DIM, etc.

The TI103-RS232, is packaged in a bone colored plastic housing. A three blade electrical plug allows it to plug into standard wall outlets and a security screw keeps the module from being accidently removed. A serial communication cable with a DB9 plug is attached for easy connection to any IBM compatible computer.

Features:

Allows communication via RS232 to transmit and receive Powerline Carrier Commands in 9600/19200 baud or a Version 2 in 2400/4800 baud
Compatible with X10 protocol Extended Code 1 Standard Code Preset Dim Commands
Plugs into standard wall outlet

Ordering Information:
TI103-RS232 - (9600/19200 baud, switch selectable)
TI103-RS232 Version 2 - (2400/4800 baud, switch selectable)

Specifications
Electrical Requirements
Power	120 VAC, +/-10% 50/60 Hz (DIP switch selectable)
Communications:
Type:	RS232 ASCII format
Baud Rate:	9600/19200 bps (DIP switch selectable) 2400/4800 bps (DIP switch selectable) Version 2
Addressability	16 Addresses (0-15), DIP switch selectable
Power Line Carrier Transmission Parameters:
Signal Strength	6 Volts peak to peak minimum @ 5 ohm loaded power line
Carrier Frequency	120 kHz +/- 1kHz Single or three phase (DIP switch selectable)
Transmission Options	Rude/Polite (DIP switch selectable)
Power Line Carrier Reception Parameters:
Signal Strength	35 mV peak to peak minimum
Carrier Frequency	120 kHz +/- 4kHz
Mechanical Requirements
Electrical Connections
Power	Three blade electrical plug molded in enclosure
Serial Communications	Attached serial communications cable with DB9 connector
Weight	11.2 ounces
Enclosure Dimensions:	4.60" L x 2.23" W x 3.50" Deep
Environmental Requirements
Operating Temperature	32 to 120 degrees F
Storage Temperature	0 to 150 degrees F
Operating Humidity	5 to 95% non-condensing