 |
|
|
Shop > ACT > TK184
|
ACT 8-Button Wall Mounted Transmitter
|
|
|
|
 Enlarge Image
|
Application:
Remote ON/OFF control of lighting or other electrical loads.
Description:
The TK*24 (two button transmitters) and TK*84 (eight button transmitters) are A10 enhanced powerline carrier wall mounted transmitters. The LED on the keypad, used for a guide in programming, also indicates status. The TK series of wall transmitters are programmable to any of the 256 X-10 addresses. Button functions on the eight button transmitters (TK*84) can be configured in five different modes by simple field programming (detailed in instructions). This is a special order item.
|
|
|
|
|
|
|
Features:
- Two way powerline communication, receives Status Confirmation
- Advanced A10 circuitry, X-10 Signal Compatible
- Easy Push Button Programming for Unit Address
and for:
- Response to "All Lights On" Command
- Response to "All Units Off" Command
- Response to "All Lights Off" Command
- Response to "Status Request"
- Enabling or disabling "Polite Mode"
- Eight Button can be configured for the following:
1. Eight button On/Off (Each Button - Push On, Push Off)
2. Four Buttons On, Four Buttons Off
3. Three Buttons On, Three Buttons Off plus All Lights On and All Lights Off on bottom buttons
4. Three Buttons On, Three Buttons Off plus All Lights On and All Units Off on bottom buttons
5. Three Buttons On, Three Buttons OFF plus Bright and Dim on bottom buttons
- Eight Button transmitter will accept a paper insert (provided) behind keys allowing the installer to easily identify
and label each button with the load it controls.
- Washable membrane keypads
- TK224, TK284, and TK384 available in White and Ivory
- TK184 available in Almond
| Specifications |
| Electrical Requirements |
| Supply Voltages +/-10% |
TK224I, TK224W: 240 VAC (2 Button Transmitter)
TK184I, TK184W, TK184A: 120 VAC (8 Button Transmitter)
TK284I, TK284W: 240 VAC (8 Button, Transmitter)
TK384I, TK384W: 277 VAC (8 Button, Transmitter) |
| Frequency | 50 or 60 Hz |
| Power Consumption | Less than 4.5W |
| Signal Output (Status) | 120 KHz, X-10 Powerline Carrier, minimum 6V peak to peak @ 5 ohm |
| Fuses | One (1) 0.5 amp slow blow on control circuit, factory replaceable |
| Mechanical Requirements |
| Dimensions | Sized to fit in a 2" x 4" handy box (not included) |
| Weight | Less than 16 ounces |
| Connections | Flying Leads: 16 AWG 600V rated, BLACK (Line), WHITE (Neutral),
GREEN (Ground) |
| User Interface | Membrane Keypad w/ embossed LEDs |
| Environmental Requirements |
| Operating Temperature Range | 32 to 120 degrees F |
| Storage Temperature Range | 32 to 120 degrees F |
| Operating Humidity Range | 10% to 95% non-condensing |
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
