 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > Add-a-Motor > 1361
|
Butler 64-Channel RF Remote Control System
|
|
|
|
|
For use with the Add-a-Motor Model 800DR Drapery Controller. Includes transmitter, battery, and receiver.
64-Channel "No-Aim" Remote Control
Now you can use one remote control for any combination of lamps, appliances, and universal drapery motors. Operates devices individually, or in groups. Plug in ready. Add more devices whenever you wish by simply adding receivers. Radio transmitter has "no-aim" range of 50-feet and works perfectly even if furniture is in the way.
|
|
|
|
|
|
|
Features
- Companion to the Add-a-Motor Model 800DR Drapery Controller
- Also controls one or more lamps, appliances and motors in any combination.
- Provides 64 RF channels for interference-free use in residential, commercial and multi-room applications.
- Plug-&-use receiver needs no programming.
- Radio signal penetrates furniture and obstacles.
- "No-aim" feature preferred by consumers. Controls devices anywhere in the room.
- Receiver rated 120VAC, 60Hz. Resistive: 8A, 1000W. Tungsten 5.8A, 696W.
- Transmitter includes installed battery A23, 12-volt, Alkaline (replacement readily available).
- One year limited warranty.
- ETL Listed, FCC Approved
- Conforms to UL Std. UL 1064
- Certified to CSA Std. C22.2 No. 66
Operation
The Add-a-Motor Model 800DR plugs directly into the receiver module. You can also plug in lamps and appliances such as a radio or fan.
The handheld remote control has four pairs of on/off buttons and a room code dial numbered 1 through 16. The plug-in receiver module also has a room code dial numbered 1 through 16, and in addition it has a button# dial numbered 1 through 4. When the handheld remote's room code matches the plug-in receiver's room code, the receiver will respond to a press of whichever number button the receiver's button# dial is set to. To control multiple devices with one button press, set all the receivers to the same room and button# code.
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
