Need Help?

Arlington Single Gang Box Extender

Item # BE1


Pre-Order (Usually 7-10 days)

View all Arlington products

Product Description

This device levels and supports the wiring device where the box is set back from the wall surface. Extends the box up to 1-1/2".


Features and Benefits
  • Allows the electrical contractor to comply with 2002 NEC Article 314-20.
  • Levels and supports the wiring device where the box is set back from the wall surface.
  • Works in handy boxes and 4" square electrical boxes with plaster rings for single switches or receptacle.
  • Functions with all standard devices, switches and GFCIs.
  • Manufactured from non-conductive, 105& C continuous use 94V0 rated flame retardant material for safer installations.
  • For multiple gang boxes: trim off sidewall for each extender where that sidewall would otherwise be between adjoining wiring devices.
  • Adjusts up to a 1-1/2" box extension.

Problem... Electrical box set back from wall surface.

1. Install BEl Box Extender firmly into position.

2. Pass wires through Box Extender and attach to receptacle.

3. Tighten screws for a level, supported, code compliant installation.

Note: To install without removing device wires, simply tilt the device through the BEl at a slight angle, then straighten and tighten screws!

Cubic Inch Displacement
Cubic Inch Increase.4121.5122.6123.7124.8125.912

Multiple Device Installation:
Cut BE1's or use BE2, the double gang version.

E170558   LR49636
No products are currently available from this category.
Unavailable/discontinued items are listed below for your reference.
Back to Top

What is Home Automation?

Find out! Home Automation Defined

Start Here

Plan Your Systems

Structured Wiring Systems

Complete Structured Wiring Systems from Leviton and ChannelVision Central.

Free E-Book: Home Automation Basics

Learn More