 |
Bring all your rechargeable batteries to SmartHomeUSA for free recycling under the call2Recycle program:
10 Lawrence Ave
2nd Floor
Smithtown, NY 11787
Mon - Fri, 9AM - 5PM
631-361-3600
|
|
|
|
Shop > Arlington > BE2
|
Arlington Double Gang Box Extender
|
|
|
|
|
This device levels and supports the wiring device where the box is set back from the wall surface. Extends the box up to 1-1/2".
|
|
|
|
|
|
|
|
|
Features and Benefits
|
- Allows the electrical contractor to comply with 2002 NEC Article 314-20.
- Levels and supports the wiring device where the box is set back from the wall surface.
- Works in handy boxes and 4" square electrical boxes with plaster rings for single switches or receptacle.
- Functions with all standard devices, switches and GFCIs.
- Manufactured from non-conductive, 105& C continuous use 94V0 rated flame retardant material for safer installations.
- For multiple gang boxes: trim off sidewall for each extender where that sidewall would otherwise be between adjoining wiring devices.
- Adjusts up to a 1-1/2" box extension.
Installation
Problem... Electrical box set back from wall surface.
|
1. Install
BEl Box Extender firmly into position.
|
2. Pass wires through Box Extender and attach to receptacle.
|
3. Tighten screws for a level, supported, code compliant installation.
Note: To install without removing device wires, simply tilt the device through the BEl at a slight angle, then straighten and tighten screws!
|
| Cubic Inch Displacement |
| Spacing | 1/4" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" |
| Cubic Inch
Increase | .412 | 1.512 | 2.612 | 3.712 | 4.812 | 5.912 |
|
Multiple Device Installation:
Cut BE1's or use BE2, the double gang version.
E170558 LR49636
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
