 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > PC Home Automation Controllers - Hardware and Software > Residential PC Home Control Systems > RCS PC Home Controllers and Keypads > ID850
|
Channel Vision 8" Dual Voice Coil In-Ceiling Speaker
|
|
|
|
 Enlarge Image
|
Features:
- Dual voice coil speaker delivers stereo sound from a single speaker
- Use when only one speaker will fit or to balance coverage in a whole house audio system
- Use in bathrooms, hallways, entry ways
- 8" Mica-filled polypropylene woofer with true rubber surround
- Dual ½" fluid-cooled ultra-wide dispersion mylar tweeters
- Tweeters swivel independently up to 45 degrees
- Tweeter protection using thermal sensing polymer switches
- 18 dB/octave crossover network
- Mounting template and paint shield included
- Recommended power: 5W to 100W
|
|
|
|
|
|
|
|
Specifications:
- Frequency range: 55Hz - 20kHz ± 3dB
- Sensitivity: 90dB
- Power Handling: 75 Watts/channel (RMS)
- Drivers: 2- ½" Mylar dome tweeter
1- 8" polypropylene woofer
- Impedance: 8 ohms
- Finish: ABS plastic
- Dimensions: 10¾" OD. 4" height (from surface of wall board)
- Weight: 5 Lbs as shipped
Installation:
|
- Use the included template to mark and cut an 8" hole in drywall away from ceiling joists.
- We recommend wiring with AWG 16 or larger, stranded wire.
- For proper phasing, both voice coils must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier.
- Install ID850 in hole. Tighten the mounting screws. The mounting dogs will rotate outward and grip the drywall.
- Aim tweeters
- To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC300.
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
