 |
|
|
Shop > Foard Systems Design > FG-032020-00
|
Foard Systems Design FGI Quad Input / Quad Relay & Solenoid Driver Output
|
|
|
|
 Enlarge Image
|
|
Features
|
- Quad I/O device, with four switch inputs each with level and transition detection, and four non-isolated output drivers configured to drive external relays or solenoids.
- FGI hard-wired device with screw-terminal DI and DO connections (use FGI adapter FS-1100001 to connect to the FSD Bridge Controller).
|
|
|
|
|
|
|
|
The Quad I/O devices have four switch inputs each with level and transition detection, and four non-isolated output drivers configured to drive LEDs, external relays or solenoids, or digital signal inputs on another device.
An auxiliary power input is provided, so higher power output devices can be controlled without significantly affecting the FGI control network power usage, and so higher voltage loads can be controlled. The output drivers on the relay and solenoid driver board are rated to drive up to 24 volts and 1 amp.
| Specifications |
| Product Features: |
| Inputs: |
Screw terminal FGI DI
port |
Switch level with transition detect inputs
Auxiliary power input for controlled devices |
| Outputs: |
Two screw terminal FGI DO ports |
| Screw terminal power outputs |
| Dimensions: |
2-5/8” x 1-7/8” x 3/4” |
| Power consumption: |
2.7 ma typical (excluding power used by controlled
devices) |
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
