 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > Gemini > GEM-TRANS2
|
Gemini Wireless Window/Door Transmitter: 2-Points
|
|
|
|
|
The GEM-TRANS2 is a 2-point window/door transmitter designed for use in Napco GEM-series wireless systems. When used with the supplied magnet, the transmitter functions as a window/door sensor. However, terminals are provided for normally-closed external contacts so that one or two additional devices may be used in conjunction with, or instead of, the internal reed switch. A jumper option is provided to allow a normally-open external contact to be used. This allows the use of one external contact instead of the internal reed switch.
|
|
|
|
|
|
|
The GEM-TRANS2 is powered by a 3-volt Type DL123A lithium
battery, which will power the transmitter for up to 5 years. When
battery voltage drops below normal, a low-battery report will be sent
to the receiver.
Each transmitter has a unique factory-programmed code (printed
on the battery holder and also on the rear case) that distinguishes
itself to the receiver. (Note: See control-panel instructions for
entering this six-digit hexadecimal code and its checksum digit into
the panel; be sure to enter all numbers and/or letters, including
leading zeros, if any.)
Features:
|
- Soft white GEM-TRANS2 compact and low profile
- Reversible mounting position for left or right handed operation
- "Low battery" clearly displayed at keypad by zone # and transmitter #
- Includes: built-in reed switch magnet, battery, tamper and terminals.
- Maximum Range: 500-600 feet line of sight
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
