HAI 4-Relay Module - 10A071
Relay Modules are used to convert HAI voltage outputs to Form C relay contacts for switching pumps, motors, commercial lighting, remote control breakers, and sprinkler systems. This Relay Module provides 4 independent Form C Relays. Contacts rated 5 amps at 24 VDC. LED indicators show which relays are energized. This model is supplied with foam adhesive mounting tape.
View Product Details
$38.95
HAI Two Way X-10 Transceiver Kit - 10A097
This kit is intended for use in larger homes to increase X-10 signal strength. By using this interface module in addition to the one included with an HAI home control system, X-10 signal output is doubled and all electrical circuits receive a clear signal. Traditional phase couplers are no longer needed.
View Product Details
$32.95
HAI Two-Way Voice Module - 10A111
The Model 10A11-1 Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems).
View Product Details
HAI Web-Link II Software - 1108-HAI
HAI's innovative, multi-awarding winning, Web-Link II software allows for remote access and control of your HAI home control system. Check and adjust the temperature, lights, and security via a PC, PDA, or web-enabled phone. Web-Link II offers video surveillance over the Internet, wireless access, and the ability to receive e-mails and text messages based on programmed events.
View Product Details
$327.95
HAI Home Control for Windows Media Center PC - 1109
HAI's new award-winning Home Control for Windows Media Center is software for Windows Media Centers that allow you to control all of your HAI Omni features from the comfort of an easy chair using a single Media Center remote.
View Product Details
HAI WL3 for Windows® Home Server (WHS) - 1112
WL3 is an Add-in for a Windows Home Server that allows you to monitor and control your HAI home control system from any device with a web browser, such as an iPhone™, iPod Touch™, BlackBerry™, Smartphone, computer, PDA, etc.
View Product Details
$319.95
HAI USB Snap-Link - 1120
Snap-Link is an USB key that plugs into any computer and directly communicates through the secure Ethernet port on an HAI home control system giving homeowners the ability to check and adjust lights, security, temperatures, webcams, and more.
View Product Details
$119.95
HAI Snap-Link Mobile - 1120M
Snap-Link Mobile allows you to monitor and control lights, security, audio, temperatures, and webcams on handheld mobile devices, such as PDAs, Smartphones, or other devices running Windows® Mobile operating software. It is designed specifically for a mobile device with a Touchscreen, navigation key, or scroll wheel.
View Product Details
HAI Lumina Pro / OmniPro II Expansion Board - 17A008
It adds sixteen voltage outputs for control and sixteen inputs for additional security/fire zones, auxiliary or temperature inputs. The Model 17A00-8 Expansion Board is the board only portion of the Model 17A00-1 Expansion Enclosure.
View Product Details
HAI 8-Relay Module - 19A001
Relay Modules are used to convert HAI voltage outputs to Form C relay contacts for switching pumps, motors, commercial lighting, remote control breakers, and sprinkler systems. This Relay Module provides 8 independent Form C Relays. Contacts rated 5 amps at 24 VDC. LED indicators show which relays are energized. This model has mounting holes.
View Product Details
$78.95
HAI OmniPro II Home Control System - 20A002
The OmniPro II is HAI's flagship home control and security system. It is designed for larger home and commercial installations. In addition to connections for security devices, thermostats, light switches, telephone and backup battery, the OmniPro II features three built-in serial ports for connection to additional control devices. Moreover, it has an Ethernet port that allows connection to your home network.
View Product Details
HAI Universal Mounting Plate - 20A072
Mounting plate, hardware kit & instructions. Used to mount Omni family controllers, expanders, and accessories in Leviton, OnQ, UStec, and "open house" type structured wiring enclosure.
View Product Details
HAI Omni LT Home Control System - 21A001
An ideal and economical choice for homes, townhouses, condos, apartments and small businesses, Omni LT is the entry level member of HAI's best-selling Omni product line. The Omni LT features one built-in serial port for connection to additional control devices.
View Product Details
$393.95
HAI Serial PC Cable - 21A052
This cable connects the built in serial port of a Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system to personal computers for HAI Web-Link II, HAI Windows PC Access, and other systems.
View Product Details
HAI Omni LT Expansion Module - 22A001
This module expands the Omni LT by adding 16 zones and 8 voltage outputs with overload protection and reset. The module comes with mounting hardware and cable to attach to the Omni LT home control system.
View Product Details
HAI Speaker/Microphone Module - 28A001
The Model 28A00-1 is a speaker and microphone assembly that allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems) when connected to a Two-Way Voice Module. It may be used outdoors in weather protected areas.
View Product Details
$27.95
HAI Flush Speaker/Microphone Module - 28A002
The Model 28A00-2 is a speaker and microphone assembly that allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems) when connected to a Two-Way Voice Module. It may be used outdoors in weather protected areas.
View Product Details
HAI Omnistat RC-80B Power Booster Module - 30A001
Power booster for Omnistat RC-80B Thermostat. This optional module may be needed in retrofit applications where "HVAC common" wire is not available. This module will work with any Omni family or Lumina family home control system.
View Product Details
HAI OmniTouch Trim Ring - 32A071
The OmniTouch Trim Ring is intended for retrofitting an OmniTouch or OmniTouch with Video as a replacement for the discontinued HAI Model 11A00-2 Flush Console. It is white, paintable to wall color.
View Product Details
$27.95
HAI OmniTouch Loader Kit - 32A091
The HAI OmniTouch Loader Kit is a programming cable and software utility designed to allow dealers and installers to load new firmware and screens into an OmniTouch touchscreen. Loading new screens into an OmniTouch touchscreen will be necessary to support new features of updated controller firmware.
View Product Details
HAI Touchscreen Hub with Video Encoder in Enclosure - 32A301
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied).
View Product Details
$1,216.95
HAI Touchscreen Hub with No Video Encoder in Enclosure - 32A303
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied).
View Product Details
$811.95
HAI Touchscreen Hub Only - 32A312
This Touchscreen Hub does not include an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied).
View Product Details
HAI UPB Lighting Control PIM & Cable - 36A001
A Powerline Interface Module (PIM) UPB™ will connect your lighting system to an UPB™ compatible home control system or to a computer, which can then control your UPB™ lights. It comes with a cable for connecting the PIM to a serial port on an HAI Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system.
View Product Details
$86.95
HAI Serial Connectivity Adapter Kit - 36A054
The 36A05-4 Serial Connectivity Adapter Kit is a Modular to DB-9M adapter and a 7-ft 4-conductor modular cable used to connect Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, and OmniPro II modular serial ports to DB-9F serial port on devices such as Lutron RadioRA, NuVo Concerto and Essentia (Lumina Pro and OmniPro II only), Russound CAV6.6 and CAM (Lumina Pro and OmniPro II only), and similar devices.
View Product Details
HAI 8 Button UPB House Controller - 38A002
A House Controller acts as the master lighting control that shows the status for up to eight rooms. If any light is on in one of its rooms, the button for that room is illuminated. Pressing the House Controller button will turn all of the lights in that room on or off.
View Product Details
HAI UPB Phase Coupler - 39A001
A Phase Coupler for 120/240V electrical systems increases the reliability of your HLC system. HAI recommends the use of this part in every HLC installation.
View Product Details
$69.95
HAI 15A UPB Relay Switch - 40A001
The 15A Relay UPB™ Switch is used for controlling heavier loads (up to 15 Amps) or motors, such as ceiling fans, that may hum when used with Dimming or Non-Dimming switches. It comes with a default white paddle, connectors, and instructions.
View Product Details
Item Not Yet Available
HAI Wireless Receiver for GE Caddx Security Systems - 42A001
The Model 42A00-1 Supervised Wireless Receiver adds 16 wireless zones to an HAI Lumina, Omni LT, Omni, Omni IIe, or Omni II home control system. Each Model 42A00-1 Supervised Receivers adds up to 64 wireless zones on an HAI Lumina Pro, OmniPro, or OmniPro II home control system; however, installing two of these receivers will create 128 wireless zones for an HAI Lumina Pro, OmniPro, or OmniPro II home control system.
View Product Details
HAI Lumina Home Control System - 44A001
The Lumina is a home control system primarily intended for lighting control with easy installation and set up. It does not include a built-in security system and is designed for homes and small businesses.
View Product Details
$1,080.95
HAI Lumina Pro Home Control System - 44A002
The Lumina Pro is HAI's top-of-the-line home control system that does not include a built-in security system. It is primarily intended for lighting control with easy installation and set up. It is designed for large residences and small commercial installations. The Lumina Pro may be interfaced with the Russound and NuVo audio distribution systems. HAI's OmniTouch Touchscreens.
View Product Details
HAI Quad Pet Immune Motion Detector - 47A001
The 47A001 is a Wireless Quad Pet Immune PIR (Passive Infrared) Motion Detector that works with the HAI 45A001 Wireless Receiver. This Quad Pet Immune Motion Detector that greatly reduces false alarms.
View Product Details
$119.95
HAI 4 Wireless Button Keyfob - 48A001
The 4 Button Keyfob may be programmed to control any HAI home control system feature, such as lights, temperatures, macros, and the security features of an Omni family home control system.
View Product Details
$47.95
HAI Panic/Alert Pendant - 50A001
Can trigger outgoing phone calls up to 8 different numbers, an e-mail notification, or video surveillance recording. This Panic/Alert Pendant requires the use of an HAI 64 Zone Wireless Receiver
View Product Details
$46.95
HAI Access Control Keypad - 54A001
This access control keypad is designed to interface with any HAI Omni family or Lumina family home control system, and it is both weatherproof and vandal resistant.
View Product Details
HAI 1500W UPB Dimmer Switch - 55A002
The 1500 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 1500 Watts. It comes with connectors and instructions. While this switch comes in a default mode of dimming it may be set to non-dimming.
View Product Details
HAI Wireless Recessed Door - 56A00-1
The 56A00-1 Wireless Recessed Door Transmitter is used for protection of doors and windows in installations where the transmitter and magnet must be totally hidden. The supervised transmitter and contact are concealed within the door or window frame for virtual transparency.
View Product Details
$47.95
Hi-Fi by HAI
Hi-Fi by HAI 4 Zone, 4 Source Kit in Enclosure - 62A00-1
Hi-Fi Main Board Assembly with 4 installed Zone Amplifier Cards in an Enclosure. Also comes with 4 Remote Input Modules (RIM), 4 Volume-Source Controls (VSC), Power Supply, Remote Control, and a cable for an HAI Omni Home Control System or Lumina Lighting Control System.
View Product Details
HAI Remote Input Module (RIM) for the Hi-Fi by HAI System - 62A04-1
Place Remote Input Modules (RIMs) in rooms that will have music sources that you wish to use. When you plug any music source into a RIM using a standard stereo input jack it can be shared with any room that has a Volume-Source Control (VSC), regardless if the VSC is in the same room as the RIM. Additionally, RIMs feature a routed IR emitter jack and include a flasher to allow you to use the remote of your source equipment in any room that has a VSC.
View Product Details
HAI Network Digital Video Recorder (NDVR) - 68A00-1
This 4-channel Network Digital Video Recorder (NDVR) is the perfect tool to monitor the safety and security of your home. The NDVR connects to any analog surveillance camera, including HAI’s Indoor Dome Camera and HAI’s Day/Night Color Bullet Camera.
View Product Details
HAI Wireless 4 Button Wireless Keypad - 69A00-1
The 4 Button Wireless Keypad sends up to 10 different wireless signals to activate automation programs in an HAI controller. Each button, or combination of buttons, can activate lighting, arm and disarm the security system, operate a garage door, set off a panic alarm, change temperatures, activate macros and any other function available in an HAI controller.
View Product Details
$66.95
HAI Access Control Proximity Card Reader - 75A00-1
125 KHz high security, digitally encrypted, 26-Bit proximity card reader that connects to a serial port on an HAI Home Control System. The reader has durable and scratch resistant polycarbonate housing. Full epoxy potting ensures successful operation even in harsh environments. The 75A00-1 can be mounted to metal door frame (mullion) or to any flat wall surface. The two color LED (green and red) and Piezo sounder guarantee accurate and reliable door access operations.
View Product Details
$213.95
HAI Access Control Key Tag Pack of 10 - 78A00-2
A very small (only 4 grams) 125 KHz high security digitally encrypted proximity key tag. It has a hole for a key ring or chain. It is pre-programmed at the factory with a unique encryption code. It is small and durable enough to fit on a key ring. It provides a read range up to 2 inches.
View Product Details
$59.95
HAI 12 VDC Electric Door Strike - 79A00-1
When used with 75A00-1 Access Control Reader, the 79A00-1 Electric Door Strike securely locks and unlocks a door without the need of a key. It allows the door to be locked when closed, but can be automatically unlocked by the system, or manually unlocked with a key.
View Product Details
$51.95
HAI Power Hub in Enclosure - 83A00-1
General purpose 12VDC power supply mounted in enclosure. Designed to provide power to several HAI products, including the HAI Access Control Readers with electric or magnetic locks, Omni Consoles, OmniTouch 5.7 Touchscreens, and many other devices.
View Product Details
$248.95
HAI Power Hub for Structured Wiring Enclosures - 83A00-2
General purpose 12VDC power supply for structured wiring enclosures. Designed to provide power to several HAI products, including the HAI Access Control Readers with electric or magnetic locks, Omni Consoles, OmniTouch 5.7 Touchscreens, and many other devices.
View Product Details
HAI Lumina Pro Home Control System with Ethernet Port Controller - HEHS1
The Lumina Pro is HAI's top-of-the-line home control system that does not include a built-in security system. It is primarily intended for lighting control with easy installation and set up. It is designed for large residences and small commercial installations. The Lumina Pro may be interfaced with the Russound and NuVo audio distribution systems. HAI's OmniTouch Touchscreens.
View Product Details
The Smartest DIY Home Improvements
