 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > HAI > 32A303
|
HAI Touchscreen Hub with No Video Encoder in Enclosure
|
|
|
|
|
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied).
The Touchscreen Hub supports up to eight OmniTouch or OmniTouch with Video touchscreens.
|
|
|
|
|
|
|
The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc.
HAI designed the Hub to eliminate the unsightly and unreliable “wall wart” transformers, power strips, “Y” connectors, external power supplies, battery back up units and complex wiring normally associated with camera and touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.
|
Features
|
- Connections for 8 touchscreens: Cat 5 (RJ-45) for OmniTouch with Video, 4 conductor for OmniTouch
- Inputs from 6 NTSC Composite color or b/w cameras
- Pass-through outputs for 6 cameras to TV, modulator, media center, other displays, etc.
- Power supply with battery back up for touchscreens (24 V at XX A)
- Power supply with battery back up for cameras (12 V at 1.5 A)
- Connections for all Omni family and Lumina family home control systems (console bus and ground, 3 wires)
- Supports Video Encoder (mounts on Hub circuit board), required for OmniTouch with Video.
- Supervisory output can be connected to Omni zone to indicate low battery
- Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
- Supplied with Universal Switching Power Pack, 100-240 VAC, 50/60 Hz.
|
| Specifications |
| Home Control System |
Number of Touchscreens Requiring
Touchscreen Hub |
| Omni LT |
2-3 |
| Omni IIe |
4-7 |
| OmniPro II |
4-8, 9-15 requires 2 Hubs |
| Lumina |
4-7 |
| Lumina Pro |
4-8, 9-15 requires 2 Hubs |
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
