 |
Bring all your rechargeable batteries to SmartHomeUSA for free recycling under the call2Recycle program:
10 Lawrence Ave
2nd Floor
Smithtown, NY 11787
Mon - Fri, 9AM - 5PM
631-361-3600
|
|
|
|
Shop > HAI > 35A001
|
HAI 600 Watt UPB Dimmer Switch
|
|
|
|
|
The 600 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.
|
Features
|
- Requires a neutral (white) connection wire.
- In you are using an HAI home control system with your switch you must install an UPB™ PIM & cable (HAI Part Number 36A00-1).
- In you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
|
|
|
|
|
|
|
|
Please Note: There is a 12 piece minimum when ordering this part!
These 600W switches use heavy duty components and UPB UPB™ communication technology for professional strength, reliability, and the ability to be remotely controlled by UPB™ compatible home control systems. They work over existing house wiring for easy installation in renovations, retrofits, and upgrades and are UL-Listed.
The HAI UPB™ 600W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.
The 600 Watt UPB™ Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Room Controllers, House Controllers, and home control systems to provide sophisticated lighting control.
| Switch Operation |
| The 600W switch has a Decora-style
rocker switch that may be used to control the lighting load as follows:
|
| Rocker Event |
Top Rocker |
Bottom Rocker |
| Single-Tap |
Brightens the light towards fully on |
Fades the light to fully off |
| Double-Tap |
Snaps the light to fully on |
Snaps the light to fully off |
| Hold |
Starts brightening the light towards fully on |
Starts dimming the light towards fully off |
| Release |
Stops brightening the light |
Stops dimming the light |
|
Switch LED
The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:
Switch is off - LED is blue
Switch is on - LED is off
You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).
De-rating
| In three-gang installations the switch must be de-rated
to 500W. |
| Description |
Load |
| Device Maximum Load |
600W |
| Next to One Dimmer |
600W |
| Next to Two Dimmers |
500W |
|
Configuration Software
You may change the function of this dimming switch to be non-dimming or vice-versa using the HAI UPB™ UPStart configuration software. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
Colors
This switch comes with a default white paddle, connectors, and instructions.
Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
