 |
|
|
Shop > HAI > 35A003
|
HAI 600 Watt UPB™ Dimmer Switch
|
|
|
|
|
The 600 Watt UPB™ Non-Dimming Switch is used for controlling loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.
|
Features
|
- Requires a neutral (white) connection wire.
- In you are using an HAI home control system with your switch you must install an UPB™ PIM & cable (HAI Part Number 36A00-1).
- In you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
|
|
|
|
|
|
|
|
Please Note: There is a 12 piece minimum when ordering this part!
These 600W switches use heavy duty components and UPB communication technology for professional strength, reliability, and the ability to be remotely controlled by UPB™ compatible home control systems. They work over existing house wiring for easy installation in renovations, retrofits, and upgrades and are UL-Listed.
These 600W Non-Dimming switches are for loads like compact fluorescent and high efficiency lighting fixtures that should not be dimmed.
The HAI UPB™ 600W Switch is capable of being set to a dimming mode (see Configuration Software below).
The 600 Watt UPB™ Non-Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Room Controllers, House Controllers, and home control systems to provide sophisticated lighting control.
Learn How HLC Works.
HAI's Lumina family of home control systems was specifically designed for lighting control. If you are looking for a home control system that includes security, HAI's Omni family of home control systems can provide the lighting control you need.
| Switch Operation |
| The 600W switch has a Decora-style rocker switch
that may be used to control the lighting load as follows:
|
| Rocker Event |
Top Rocker |
Bottom Rocker |
| Single-Tap |
Snaps the light to fully on |
Snaps the light to fully off |
|
Switch LED
The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:
Switch is off - LED is blue
Switch is on - LED is off
You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).
De-rating
In three-gang installations the switch must be de-reated to 500W.
| In three-gang installations the switch must be de-rated
to 500W. |
| Description |
Load |
| Device Maximum Load |
600W |
| Next to One Dimmer |
600W |
| Next to Two Dimmers |
500W |
|
Configuration Software
You may change the function of this dimming switch to be non-dimming or vice-versa using the HAI UPB™ UPStart configuration software. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
Colors
This switch comes with a default white paddle, connectors, and instructions.
Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
