 |
|
|
Shop > HAI > 55A002
|
HAI 1500W UPB Dimmer Switch
|
|
|
|
|
The 1500 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 1500 Watts. It comes with connectors and instructions.
Available in White and Ivory
While this switch comes in a default mode of dimming it may be set to non-dimming
|
Features
|
- Requires a neutral (white) connection wire.
- In you are using an HAI home control system with your switch you must install an UPB™ PIM & cable (HAI Part Number 36A00-1).
- In you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
|
|
|
|
|
|
|
|
These 1500W switches use heavy duty components and UPB communication technology for professional strength, reliability, and the ability to be remotely controlled by UPB™ compatible home control systems. They work over existing house wiring for easy installation in renovations, retrofits, and upgrades and are UL-Listed.
The HAI UPB™ 1500W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.
HLC Logo The 1500 Watt UPB™ Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Room Controllers, House Controllers, and home control systems to provide sophisticated lighting control.
Learn How HLC Works.
HAI's Lumina family of home control systems was specifically designed for lighting control. If you are looking for a home control system that includes security, HAI's Omni family of home control systems can provide the lighting control you need.
Switch Operation
The 1500W switch has a Decora-style rocker switch that may be used to control the lighting load as follows:
| Switch Operation |
| The 1000W switch has a Decora-style rocker switch
that may be used to control the lighting load as follows:
|
| Rocker Event |
Top Rocker |
Bottom Rocker |
| Single-Tap |
Brightens the light towards fully on |
Fades the light to fully off |
| Double-Tap |
Snaps the light to fully on |
Snaps the light to fully off |
| Hold |
Starts brightening the light towards fully on |
Starts dimming the light towards fully off |
| Release |
Stops brightening the light |
Stops dimming the light |
|
Switch LED
The 1500W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:
Switch is off - LED is blue
Switch is on - LED is off
You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).
De-rating
For a proper fit in a multiple gang installation, it may be necessary to remove one or both of the break-off tabs on the sides of the 1500W switch. When tabs are removed, the overall rating of the device must be reduced in accordance with the following chart:
| Do not use in two or three-gang installations. |
| Description |
Load |
| Device Maximum Load* |
1500W |
| No Fins Removed Deep Box** |
1200W |
| No Fins Removed Normal Depth Box |
1000W |
| One Fin Removed Next to One Dimmer |
800W |
| Both Fins Removed Next to Two Dimmers |
600W |
* When in a PCS Lighting Control Panel
** Large Wall Box = greater than 40 Cubic Inches |
|
Configuration Software
You may change the function of this dimming switch to be non-dimming or vice-versa using the HAI UPB™ UPStart configuration software. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
Colors
The faceplate is not removable for the 1500W switch; accordingly, you must order your desired color. It is available in White (WH) or Ivory (IV) colors.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
