 |
|
|
Shop > HomePro > ZRW100
|
HomePro Z-Wave™ Wall Mounted 15A Relay Switch
|
|
|
|
 Enlarge Image
|
This product has been discontinued.
The replacement product is the ZRW103X
This Wall Mounted Switch can be easily be
installed as a replacement for the current switch.
It can directly control the on/off of any connected
lighting or other electrical load. It can also be
controlled from a HomePro Wireless Remote Controller.
Pushing the top and bottom of the switch at the
same time identifies the Wall Mounted Switch
to the wireless Controller. Loads can then be
turned on and off, in groups, or individually from
the Wireless Controller.
Using the HomePro Wireless Controller, an "All
On" command can be broadcast for security
reasons, and with the "Timer" feature, loads controlled
by the Switch and other HomePro RF
modules can be scheduled to turn on and off at
pre-selected times.
This is a special order item and is available in Almond only.
|
|
|
|
|
|
|
Specifications:
- Power: 120 VAC, 60 Hz
- Signal (Frequency): 908.42 MHz
- Maximum Load Resistive: 15 amps (1800 watts) maximum, 120 VAC
- Maximum Motor Load: 1/2 H.P. maximum, 120 VAC
- Maximum Incandescent Load: 600W maximum, 120 VAC
- Range: Up to 100 feet line of sight between the Wireless Controller
and /or the closest HomePro Receiver. Receivers however, relay
the signal to the next closest receiver, creating an RF network.
Fuses Factory replaceable only fuse.
- Dimensions: Approximately. 2.4"W x 4.25"H x 1.6"D.
- Weight: Less than 16 oz.
- Mounting: Mounting plate for 2" x 4" electrical junction box
- Connections: Flying Leads: BLACK (Line) -18 AWG, RED (Load) -18 AWG, WHITE
(Neutral) -18 AWG, GREEN (Ground) - 18 AWG.
- Operating Temperature Range: 32-105O F (0-40O C). Indoor use only
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
