Smart Home Systems

 The Smartest DIY Home Improvements

 Home Automation, Security & Energy Savings
         
 Phone Orders: 1-888-843-9103 | 631-361-3600
                                  
 
Search
 
Shop



Bring all your rechargeable batteries to SmartHomeUSA for free recycling under the call2Recycle program:

10 Lawrence Ave
2nd Floor
Smithtown, NY 11787

Mon - Fri, 9AM - 5PM
631-361-3600


  Shop > HomePro > ZRW113X
x10
  HomePro Z-Wave™ Wall Mounted 20A 3-Way Master Relay Switch, Isolated Contact
 
HomePro Z-Wave™ Wall Mounted 20A 3-Way Master Relay Switch, Isolated Contact
Enlarge Image
This 3-Way Master Wall Mounted Switch can be easily be installed as a replacement for the current switch. It can directly control the on/off of any connected lighting or other electrical load. It can also be controlled from a HomePro Wireless Remote Controller, or other Z-Wave Auxiliary Switches.

Pushing the top and bottom of the switch at the same time identifies the Wall Mounted Switch to the wireless Controller. Loads can then be turned on and off, in groups, or individually from the Wireless Controller.

Using the HomePro Wireless Controller, an "All On" command can be broadcast for security reasons, and with the "Timer" feature, loads controlled by the Switch and other HomePro RF modules can be scheduled to turn on and off at pre-selected times.

Isolated Contact Relay, 20Amp
Item # ZRW113X
Select Options:
$81.95  
Shipping Rates
Free Technical Support
Low Prices Guaranteed!
Availability:
Item is Available
Display All:
HomePro
Overview Specifications Related Items Manual x10
Specifications:
  • Power: 120 VAC, 60 Hz
  • Signal (Frequency): 908.42 MHz
  • Controlled Output Maximum Switching Isolated Contacts: 20 amps (5540 watts) maximum, 277 VAC
  • Range: Up to 100 feet line of sight between the Wireless Controller and /or the closest HomePro Receiver. Receivers however, relay the signal to the next closest receiver, creating an RF network. Fuses Factory replaceable only fuse.
  • Dimensions: Approximately. 2.4"W x 4.25"H x 1.6"D.
  • Weight: Less than 16 oz.
  • Mounting: Mounting plate for 2" x 4" electrical junction box
  • Connections: Flying Leads: BLACK (Line) -18 AWG, RED (Load) -18 AWG, WHITE (Neutral) -18 AWG, GREEN (Ground) - 18 AWG.
  • Operating Temperature Range: 32-105O F (0-40O C). Indoor use only
Return to Top
Contact Us |  Link To Us |  Copyright © 1997 - 2008 Smart Home Systems, Inc. All rights reserved |  Sitemap