| Specifications |
| Electrical Requirements |
| Power |
| Supply Voltage | 0.2 Amps @ 24VAC |
| Temperature | Accuracy: ±1ºF @ 70ºF |
| Power Button | Turns the unit ON or OFF, depending on current status |
| Timer Button | Sets Timer ON and Timer OFF functions, according with current POWER status: if POWER is ON, sets Timer OFF function, and if POWER is OFF, sets Timer ON function |
| Mode Button | If POWER is ON, sets and displays the operational MODE |
| Fan Button | If POWER is ON, sets and displays the FAN mode. |
| Up/Down Button | If POWER is ON, displays and increments/decrements temperature set point |
| Z-Wave Interface | Receives commands from the HomePro ZTH100 and sends status codes for the ZTT000 Z-wave module. |
| Electrical Output |
| Relays | 2 relays - Fan control with high and low outputs
Output: 120 VAC - Single 3 prong polarized receptacle
2 relays - Compressor control with first and second stage outputs
1 relay - Electric Heat control output
1 relay - Gas Heat (Furnace) control output
2 relays - Reversing Valve control outputs
|
| Display | 2-½ digit Liquid Crystal Display
Displays ambient temperature from 0ºF to 127ºF
Displays set point temperature from 40ºF to 90ºF
Scale: Fahrenheit
Resolution: 1ºF
|
| Mode LEDs | Indicates operational mode when POWER is ON |
| Fan LEDs | Indicates fan setting, when POWER is ON |
| Buzzer | 2400Hz. Makes a short beep when unit turns ON or a valid code is received from the ZTH100 Wireless Controller; makes a long beep when unit turns OFF; makes a double beep if an invalid code is received from the Wireless Controller. |
| Environmental Limits |
| Operating Temperature | 32°F (0°C) to 122°F (50°C) |
| Storage Temperature | -4ºF (-20ºC) to 176ºF (80ºC) |
| Operating Humidity | Maximum 95% non-condensing |
The Smartest DIY Home Improvements
