 |
|
|
Shop > HomePro > ZTW100X
|
HomePro Z-Wave Radio Frequency Controlled Wall Mounted Transmitter
|
|
|
|
 Enlarge Image
|
This product has been discontinued.
The ZTW100 Wall Mounted Transmitter is a component of the HomePro lighting control system. Install the ZTW100
Wall Mounted Transmitter like a standard wall switch and program it from a Controller to operate loads. Inclusion of
this Wall Mounted Transmitter on a Controller menu allows programming of the ZTW100 to provide remote control
of ON/OFF and DIM/BRIGHT of lamps connected to Z-Wave devices (or nodes).
|
|
|
|
|
|
|
This Wall Mounted Transmitter is designed to work with HomePro and other Z-Wave controlled lamp and appliance
devices. As part of a HomePro network, the ZTW100 will also act as a wireless repeater to insure that commands
intended for another device in the network are received. This is useful when the device would otherwise be out of
the radio range of the controller.
There are no field repairable assemblies on this unit. If service is needed, the unit must be returned where purchased.
CAUTION! Read and understand these instructions before installing. This device is intended for installation in
accordance with the National Electric code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. It is recommended that a qualified electrician perform this installation.
For indoor use only.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
Kill-A-Watt: Real-time Electric Usage and Cost Monitor
