 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > Remote & IR Control > Extend the Range of Infrared & RF Controls. > W2C
|
Way2Call Hi-Phone Desktop USB Telephone Interface
|
|
|
|
 Enlarge Image
|
The Way2Call Hi-Phone Desktop is a powerful computer-based dialer for use with a number of telemarketing / membership software programs. The unit is widely used by colleges and universities as well as membership-based organizations and franchises.
Using the Way2Call Hi-Phone Desktop with the optional HomeSeer Phone software (sold separately) allows you to communicate with your PC using any telephone in your home. Just pick up a phone, press "#", then speak voice commands or use the telephone's keypad to control your lights, appliances or audio/video equipment. Any voice commands that you configure in HomeSeer will be available via the telephone.
|
|
|
|
|
|
|
Features (with HomeSeer Phone Software):
- Built in voice interface, so no voice interface is required in your computer.
- Can operate in full duplex mode so you can give voice commands even if the unit is speaking to you.
- Connects via USB for easy installation.
- Press the # key on any in-house phone and you will be connected to HomeSeer.
- Detects when a remote party hangs up the phone. The call is then terminated. This results in smaller voice mail messages.
- Incoming rings may be muted and not sent to your in-house phones until caller ID is detected. This gives the phone software enough time to detect the caller ID information and drop the call or send the call to a voice mailbox before annoying the household with the rings. This setting is software controlled and settable in the HomeSeer Phone options tab.
- When caller ID is detected, the ring pattern can be changed, so important calls or calls for a specific person can be assigned a special ring.
- When interacting with the computer on an in-house phone, and an external call arrives, the call is announced to you over the phone. If caller ID information is available, this is announced also. You can then press * (star) 9 to switch to the incoming call.
- From an in-house phone, you can say "dial bill smith" and the phone software interacts with the box to dial the number for you.
- Dialing can also be done by number by saying "dial 911".
- On a power failure, the box connects all in-house phones to the outside and does not interfere with the normal operation of the phone.
- Note that the device can only handle voice, and will not act as a data modem.
The Hi-Phone includes the following:
- 1 Each - Hi-Phone Desktop unit which includes one RJ11 jack for your telephone line connection and one RJ11 jack for connection to the phones in your home.
- 1 Each - Installation Guide
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
