 |
|
|
Shop > Honeywell > HSA600
|
|
|
 Enlarge Image
|
Remote sirens that generate a loud (110 decibel) alarm to annunciate a fire, intrusion, or emergency condition can be connected to your Honeywell Wireless Home Security System. The sirens can be used to replace or augment the control panel audible alarm or to generate additional alarms in other areas. Multiple remote sirens can be used to ensure than an alarm is heard throughout the entire house.
|
|
|
|
|
|
|
|
Honeywell Security Frequently Asked Questions
1. Is the Honeywell System compatible with the X10 system?
The Honeywell system is only compatible with X10 powerline equipment like light switches/modules.
2. Does the Fresnel PIR 998 work with Honeywell HSK200CP?
At this time no motion sensor is compatible with the Honeywell System.
3. How do I stop the system from calling me remotely?
There is no way to disarm the panel remotely by phone; you must use the control panel, keychain or keypad.
4. Can I arm and disarm the system with the Keychain Remote?
The Honeywell system can be armed and disarmed with the keychain remote.
5. Can I arm & disarm with the Handheld Remote?
The Honeywell system can be armed and disarmed with the handheld remote.
6. What is the range of the keychain Remote?
The range of the keychain remote is approximately 500 feet.
7. Can I program lights to operate to a time schedule without using a PC to program the panel?
Yes unto 8 modules can be programmed with out the PC. With the PC a total of 16 modules can be programmed
8. Does the Keychain have a Panic alarm?
Although the keychain has a panic button it only would flash lights and trip the main control panel siren. The panic button would not trip the plug in or wired siren or dial out the programmed numbers.
9. What action triggers the "Emergency" Response?
The following items would trigger an Emergency response: Keychain emergency button, Freeze sensor, Flood sensor, smoke detector and carbon monoxide.
10. When I load the software I get an error message regarding HACK component program. What is this and how do I correct it?
Most of the time this can be corrected by uninstalling and reinstalling from the Honeywell uninstall menu. If you use the Windows add/remove programs problems would occur.
11. What is the expected battery life for the Sensors?
The Expected Battery life of a Honeywell sensor is 6 months to 1 year depending on the usage. All sensors should be checked once a month by pressing the system status button.
12. Are there motion detectors available?
At this time no motion sensor is compatible with the Honeywell System.
13. Will the Honeywell system work with ME, 2000, and XP?
The Honeywell system software works with Windows 95, 98se, and ME. There is varied results with Windows 2000 and XP most times is can be uninstalled and reinstalled to fix the problem.
14. Are the Honeywell modules (HSA111) compatible with the X10 controllers and activehome CM11A interface?
Yes Honeywell plug-in modules are 100% compatible with X10 products
15. On the Honeywell Home Security System, how many sensors can be controlled by the system?
You can add up to 16 sensors and up to 8 control units as well as an unlimited number of lighting modules, appliance modules, and remote sirens.
16. Can you also suggest a glass break sensor that is compatible?
You can use a SR5150W universal glass break sensor with a door and window sensors to create a glass break senor.
17. Will the X-10 Motion Interface work with Honeywell Systems?
At this time no motion sensor is compatible with the Honeywell System.
SmartHomeUSA Tech support: 631-361-8609
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
