 |

|
 |
Shop > Honeywell > HSA700
|
|
|
Enlarge Image
|
This product has been discontinued.
Flood sensors can be placed in areas of your home or property such as floors, basements, or any other area that is subject to flooding. Flood sensors are frequently used to monitor the effectiveness of sump pumps. The flood sensor consists of a water detector component and a wireless transmitter. The water detector can be attached to any surface that you want to protect from water damage.
|
|
|
|
|
|
Flood sensors can be connected to your Honeywell Wireless Home Security System to activate an audible alarm that alerts you to rising water levels and helps you save your personal property from costly water damage.
Features:
|
- Flood sensors detect the presence of water wherever the water detector component is mounted.
- Flood sensors are mounted with specially formulated adhesive tape on floors or other surfaces that you want to protect from water damage.
- Flood conditions are monitored continuously - 24 hours a day.
- Flood sensors communicate the presence of water to the Home Security System control panel and cause an alarm to sound.
- The Home Security System can be programmed to deliver a voice message to two designated numbers to announce potential water damage.
- Each flood sensor continually tests its batteries and notifies the control panel when they are low.
You Need to Know:
|
- Each flood sensor requires two AA alkaline batteries (not included).
- Each flood sensor must be added to the Home Security System control panel equipment list before it can operate as part of the system.
- Each flood sensor should be installed within 100 feet of the Home Security System control panel.
- Flood sensors will activate if they come in direct contact with water.
- Flood sensors are designed to operate indoors.
- Flood sensors should not be left submerged in water for more than 24 hours.
- Each flood sensor should be tested on a monthly basis to verify that it is working properly.
|
|
|
|
|
|
|
 |
 |
|