|
The Irrigander 2 Splitter is a 2 zone expander that allows adding an additional irrigation valve without adding new field wiring and without using an additional output on the irrigation controller.
The Irrigander 2 Splitter is installed close to the valves to be controlled. Connect the input to the Irrigander 2 Splitter to the field wire connected to the irrigation controller and then connect the Irrigander 2 Splitter outputs to the two valves to be controlled (Irrigander 2 Splitter diagram). Simply set the irrigation controller to the total run time desired for the two valves. The Irrigander 2 Splitter will divide the zone run time equally between the two valves each time the zone is activated.
The Irrigander 2 Splitter easily adds control of an added valve without requiring the replacement of the irrigation controller or adding new field wiring. Detailed specifications and operating instructions are in the User Guide, available below.
|
The Smartest DIY Home Improvements
