 |
|
|
Shop > LIN > 48210-DSM
|
|
|
 Enlarge Image
|
This product has been discontinued.
Features:
- RCA video and stereo audio inputs.
- F-Connector output (channels 14-69 UHF and 54-94 and 100- 125 CATV).
- DC power supply.
- RCA video and stereo audio loop through.
- Distributes MTS stereo surround sound.
|
|
|
|
|
|
|
|
The Stereo Modulator is a desktop-style device designed to work with audio/video components such as DVD players and home theater receivers. It takes the signal from an audio/video component and converts the signal to a cable TV channel, which can then be broadcast over the whole-house coaxial network to multiple televisions on one unused cable channel, effectively setting-up an in-home entertainment channel. It can be used singly or with the Media Center Modulator.
The "frequency agile" modulator allows the selected broadcast channel to be programmed via push buttons. The modulator outputs on any UHF channel between 14 and 69 or CATV channel between 54 and 94 and 100-125 (channels 75-80 are recommended with the Notch Filter; see below note).
NOTE: The Stereo Modulator broadcasts in stereo. In a Structured Media system when used with Structured Media Video Distribution modules such as Leviton's 3x8 Bi-Directional Video Amplifier (PN 47690-38B ), the Stereo Modulator must be used with a Leviton Notch Filter (PN 47690-NFA ) to clear the cable channel and avoid interference.
| Specifications |
| Dimensions | 7.8"h x 2.4"w x 7"d |
| Inputs: | 1 RCA video,2 RCA left/right audio |
| Outputs: | 1 F connector for RF signal (1 RCA video,2 RCA left/right audio)loop through |
| Operational channels: | 14-69 UHF;54-94 and 100-125 CATV (76-80 recommended with Notch Filter) |
| S/N ratio: | >60dB |
| Separation @1KHz: | >25dB |
| Bandwidth: | 50MHz-860MHz |
| Power: | 12V DC @300mA |
|
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
