 |
|
|
Shop > Z-Wave™ Wireless Lighting and Appliance Control > Wayne-Dalton Z-Wave Home Access and Controls > HCA02-10E
|
Leviton DHC System Amplifier with Built-In Test Signal Generator
|
|
|
|
|
Ensures Sufficient Command Signal Strength Throughout 3-Wire Residential Wiring Systems For Proper DHC Network Operation
Performs a variety of functions to ensure outstanding DHC system performance and reliability. The module
couples transmitter (programmer and controller) signals generated on the 120V leg where the transmitter draws
power onto the other leg in a 120/240V residential wiring system.
|
|
|
|
|
|
|
The module also amplifies and repeats command
signals to maintain proper signal strength throughout the DHC system. Leviton's exclusive Intellisense™
Technology (gated automatic gain control) feature helps ensure top performance even when noise is present on
the AC powerline. The module provides convenient ON/OFF test signal transmission capability. This allows for easy signal strength verification at individual module locations with Leviton's Cat. No. 6386 Signal Strength
Indicator. The error lamp indicates that the Intellisense feature is activated.
This product can not be used in 3-Phase systems.
Note: An HCA02-10E must be installed in all panels in every HCCXX series DHC installation to ensure adequate
signal strength.
Applications
Amplifier and signal test transmitter functions assure proper DHC command and network operation in 3-wire residential wiring systems. The module should be installed at the main panel with its own dedicated 15A D.P. circuit breaker or two 15A S.P. breakers equipped with handle tie. An HCA02-10E is recommended for every DHC installation to ensure adequate signal strength.
Features
|
- Couples and amplifies DHC signals between 120V legs of single-phase residential wiring systems
- Includes test signal generation function for testing command signal strength at individual module locations
- Equipped with Intellisense (gated automatic gain control) for outstanding performance and reliability
- Green pilot light indicates when DHC signal is transmitting
- Connects to a 15A double-pole breaker or two 15A S.P. breakers equipped with handle tie to attach two 120V legs in main panel box
- Rating: 120VAC, 60Hz, 5W
- Backed by Limited Two-Year Warranty
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
