 |
|
|
Shop > Leviton > IPP15-1LW
|
Leviton Decora Manual-ON Occupancy Sensor - 15 Amp
|
|
|
|
|
Leviton’s IPP15-1LW Decora Occupancy Sensor acts like a standard wall switch and it has the added energy savings benefit that if you forget to turn the lights OFF, the lights will turn OFF automatically if motion is not detected within the coverage area.
The unit installs in place of a single-pole wall switch and fits in a standard wallbox. The unit can be used for switching
incandescent and fluorescent and low voltage lighting with electronic or magnetic ballasts.
|
|
|
|
|
|
|
|
TYPICAL SPECIFICATION
The Decora Manual-ON Occupancy Sensor shall be capable of detecting infrared emissions from human presence and responding by keeping incandescent, low-voltage, and fluorescent lighting loads ON. If this unit does not detect movement after a preset period of time, it will respond by switching its assigned load OFF. The unit shall switch at the zero crossing point to the AC power curve to ensure maximum relay contact life and compatibility with electronic ballasts.
The Manual-ON Occupancy Sensor shall be equipped with a push-button to provide manual ON/OFF switching in accordance with California Title 24 requirements. The Sensor shall feature adjustable delayed-OFF time as well as provide sensitivity adjustment and integral sliding binders to customize the horizontal field of view. The unit shall be capable of providing optional Manual-ON/Automatic-OFF operation. If motion is detected within 30 seconds after the load has been turned OFF due to the absence of motion, the lights will turn back ON. If 30 seconds expires, the lights (load) will need to be turned ON manually.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
