 |
Did You Know?
You Get:
100% Free for Life
Technical Support:
- Before you buy
- After you buy
- Via Phone
- Via Email
- In our Forums
.. We're here for you.
Email Tech Support
OR between 9am-5pm EST: 1-888-843-9103
OR Post in the Forums.
|
|
|
|
Shop > Monterey Instruments > MMIR
|
|
|
|
Control and entire sequence of X-10 events with the touch of a button. A single touch will dim the lights, close the drapes, put on soft music and start the Jacuzzi. No computer is required. One of our hottest sellers. Macro Module allows you to do a "macro" (i.e. sequence) of X-10 events based on a single X-10 button press.
|
|
|
|
|
|
|
For example, assign X-10 code B1 ON as your Home Theatre macro. Enter the macro commands you want for Home Theatre viewing and save them. Whenever you press B1 ON, Macro Module will set up the lights for theatre viewing. Programming is easy. Each macro can contain up to 48 X-10 commands. Program your own, like mood lighting, movie time, romance, TV lighting, end of day and lots more. Detects and corrects bad X-10 signal transmissions. Non-volatile memory holds your programmed macro in the event of power failure.
Features
- IR Control. Transmits up to 27 codes of any House and Unit code with any IR Remote Control
- Holds up to 42 macros which store up to 36 X-10 codes each
- Larger macros can roll over code storage into other macros
- Holds up to 32 timers (16 simultaneously) to initiate another macro or X-10 code from 2 minutes to 8.5 hours after a macro has been transmitted
Programming
|
- Each macro can contain up to 48 X-10 commands! Program your own macros, like mood lighting, movie time, intermission, romance, TV, lighting, end of day and lots more!
- Detects and corrects bad X-10 signal transmissions. Non-volatile memory holds your programmed macros during a power failure.
- Macro Module 42IR features IR Control. Learns up to 27 codes from most existing IR remote controllers to initiate a macro or X-10 code.
- Holds up to 42 macros which store up to 36 X-10 codes each. Larger macros can roll over code storage into another macro.
- Holds up to 32 timers (16 simultaneously) to initiate another macro or X-10 code from 2 minutes to 8.5 hours after a one macro has been transmitted.
- Installation Manual for the MM-IR and the PMC-10
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
