 |
|
|
Shop > Nitek > TS515
|
Nitek Long Range Video Transmission System
|
|
|
|
|
For operation over twisted pair or CAT5 cables from 100 to 1,500 feet. System includes VB37F passive transmitter, TR515 active receiver and one 12VDC wall power pack.
|
|
|
|
|
|
|
Both the TS515 and TS560 are designed for operation over category 2, 3, 4 or 5 twisted pair cable. The systems work equally well over existing communication and computer network spare pairs, or new cable installations. A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network. Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with minimum loss. A dip switch on the receiver unit provides incremental adjustment of gain and frequency compensation to allow the system to be "fine-tuned" for an existing cable. This unique feature provides adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs. The receiver unit is powered by a 12VDC supply, included. The transmitter requires no power. In multiple receiver applications a common supply can be used.
Features
|
- Active electronics compensate for frequency and level loss
- Built - in protection from power surge, tranients, static or other electrical interference
- High resolution color or monochrome video
- Complete immunity to ground loop; video and AC can be run in a common raceway, where allowed
- Video can be run in the same cable with telephone and computer signals
- Easy to install
- Click here to view Dimensions
Applications
|
- Elevators - making traveling coax unnecessary
- High Rise Buildings - between floors. through punchdown blocks
- Detention Facilities - using existing communication wiring
- High Voltage Facilities - high immunity to AC power interference
- Parking Garages - where running coax is difficult to impossible
- Remote Gates - can be run in same cable with audio and gate control
Installation Diagram
System Components
All TS515 and TS560 systems include a VB37F transmitter, a receiver unit and a 12 VDC wall transformer.
Wire and Cable Recommendations
Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring. The systems will operate over wire gauges from 26AWG through 12AWG but are optimized for 24AWG. Category 2, 3, 4 or 5 cable may be used. Individually shielded pairs should be avoided, as they drastically reduce the operating range of the systems. Multi-pair cable with an overall shield is acceptable. Video can be operated in the same communication cable coexistent with telephone, computer, control signals, power voltages and other video signals. While video may be routed through telephone punch down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.
| Specifications |
| Model | TS515 / TS560 |
| Transceiver unit |
| Size | 1.3"H x 2.0"W x .95"D |
| Power Requirements | NONE REQUIRED |
| Input | 1 vpp composite video Monochrome or Color
|
| Output | Balanced low voltage current loop
|
| System |
| Video Format | RS170, NTSC, PAL, SECAM, CCIR (Color or B/W) |
| Video Input | 1 vpp composite video Monochrome or Color
|
| Operating Frequency | DC to 10 MHz
|
| Common Mode Rejection | >60 dB typ. |
| Wire Size | 12 to 26 AWG Unshielded Twisted Pair
|
| UTP Category | Unshielded Category 2 or better
|
| Temperature Range | -40 degrees C to +85 degrees C
|
| Humidity Range | 0 to 98%, non - condensing
|
| Transient Immunity | 6,000 V 1.2uS x 50uS per ANSI / IEEE 587 C62.41 B3
3,000 A 8uS x 20uS when ground screw terminal is connected to earth - ground
|
| Enclosure Material | Black ABS Flame Retardant
|
| Twisted Pair Connection | Screw Terminals
|
|
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
