 |

|
 |
Shop > Lighting, Appliance & Home Automation Controls > Leviton Occupancy Sensors > Leviton Outdoor PIR Occupancy Sensors > BX-80N
|
Optex High Performance Outdoor Boundary Detector
|
|
|
|
|
Outdoor PIR Protection that covers a building's perimeter: the BX-80N's long, narrow detection area comes from the center point covering both sides.
The BX-80N creates a multi-layered, horizontal barrier that detects intruders and sounds the alarm before they actually break in. Just one BX-80N can protect a long area, because it is installed in the center of the detection area and protects on both sides. BoundaryGuardTM makes you feel secure knowing your building is well guarded
|
|
|
|
|
|
Optex High Performance Outdoor Boundary Detector
| Specifications |
| Model | BX-80N |
| Detection Method | Passive Infrared |
| Coverage | 80ft (24M) (40ft {12m} on each side) |
| Detection Zones | 4 Zones ( 2 on each side) |
| Sensitivity | 1.6°C (3°F) at 0.6m/s (2ft/s) |
| Detectable Speed | 0.3 ~ 1.5m/s (1 ~ 5ft/s) |
| Power Input | 10 ~ 28VDC |
| Current Draw | Normal 28mA Max. 28mA |
| Alarm Period | 2 ± 1sec |
| Relay Output | 2 Relay outputs N.O. & N.C. 28VDC 0.2A (Max.) each |
| Tamper Switch | NC Opens when cover removed |
| Test Mode | On or Off
|
| Warm-up Period | Approx. 45sec (LED blinks) |
| LED Indicator | LED is blinking during warm-up period
Alarm condition |
| Operating Temperature | -20 ~ +50°C (-4 ~ +122°F)
|
| Environment Humidity | 95% Max |
| RF Interference | NO Alarm 20V/m |
| Mounting | Wall, Indoor/Outdoor |
| Mounting Height | 0.8 ~ 1.2m (2.7 ~ 4ft) |
| Weight | 400g (14oz)
|
| IP Rating | IP55 |
| Standard Accessories | M4 Mount Screws x 20 x 2 |
*Specifications and design are subject to change without prior notice.
NOTE: This unit is designed to detect movement of an intruder and activate an alarm control panel. Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion. This product conforms to the category "Residential, Commercial and Light Industry" of EMC Directive 89/336 EEC.
|
|
|
|
|
|
|
|
|
 |
 |
|