 |
|
|
Shop > Phone Systems, Intercoms, and Related Products > Panasonic 8x24 Advanced Hybrid Telephone System > MM2LS-800
|
PCS SceneMaster MultiModule Lighting Controller
|
|
|
|
|
This product has been discontinued.
Product Overview
Powerline Control Systems is proud to introduce the MM2 Multi-Modules. These two circuit plug-in circuit lighting controllers are available in two versions: the MM2L/S-800 powers two dimming circuits, 800 watts total, 800 watts per circuit maximum, and the MM2F/S-15 has two non-dimming outputs of 15 amps total, 15 amps per circuit maximum.
|
|
|
|
|
|
|
The SceneMaster™ versions of the Multi-Module lighting modules allow the designer/installer to implement up to sixteen pre-set scenes, (user pre-set lighting levels) for each circuit. Each scene, which allows any group of lights to change to desired levels simultaneously, is activated by sending just one X-10 ON command (less than .6 sec). Whole house lighting systems can be designed consisting of only inexpensive transmitters and PCS receivers. The SceneMaster lighting system allows for four scenes per room in multiple rooms, such as the dining room, living room, home theater and bedrooms, in addition to eight whole-house scenes (such as Night, Away, Home and Alarm) and four pathway scenes.
Auto Flash Mode
Security scene can flash lights On and Off automatically.
Feed Through Outlets
The upper two outlets are direct feed through from the receptacle providing convenient power for audio video equipment or household appliances.
Programmable Receive Level
Receive level can be set by the installer from 5mv to 350mv.
Dimming Features
|
- Brighten from Off
Lights can be brightened from the Off state without having to come to On state first.
- Soft Start
Allows lighting circuits to be turned on or turned off gradually.
- Preset Dim Command
Lighting level set by controller directly with only one X-10 command (no sequence of bright or dim commands required).
- Previous State Restored
The unit returns all circuits to the previous brightness levels and on/off states if power is lost and then restored.
- MicroStep
Lights can be brightened or dimmed in 1/200 increments.
- Lamp Switch Control
Each circuit can be turned on or off with the on/off switch on the lamp even when the output of the MM2 is off.
Installation
|
- Connection
Remove cover plate from duplex receptacle. Insert MM2 into receptacle and fasten with ground screw provided.
Load Types:
|
- Dimming (Lamp) Outputs: Incandescent or Magnetic Low Voltage.
- Non-Dimming (Relay) Outputs: Flourescent loads to 15 amps maximum.
- Warranty: Five year limited warranty.
- UL Listing: UL UL 244A
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
