 |
|
|
Shop > STI-USA > STI-30150
|
The New and Improved STI Wireless Driveway Monitor
|
|
|
|
 Enlarge Image
|
The improved Wireless Driveway Monitor sends a wireless signal to your home to alert you when a unannounced vehicle enters your driveway. The receiver chimes and the ALERT light flashes red for about 15 minutes.
The driveway sensor uses a patented magnetometer sensor system. Movement of any large metallic (iron or steel) object close to the driveway sensor will cause the sensor to transmit to the receiver.
The sensor may be placed as far as 1000 feet (line of sight) away from the receiver in your home. For best performance, mount the sensor on a 4x4 post, four to eight feet off the ground.
Additional sensors may be required for driveways exceeding 12 feet or to monitor an additional driveway.
|
|
|
|
|
|
|
|
Features
|
- Will not be triggered by animals, people or shadows.
- Waterproof, battery-powered sensor mounts next to your driveway.
- Receiver plugs into a standard electrical outlet.
- Easy installation. No difficult underground wiring.
- Operates with a maximum of 1000 feet between sensor and receiver.
- Additional Driveway Monitors, Motion Alert sensors or receivers available to cover multiple areas and to expand your system.
- Additional sensor will produce a different chime from the receiver when triggered.
- After activation, there is a five second delay for the unit to reset before the next vehicle will be detected.
- Can be set to low or high sensitivity level (factory default is high).
- One (1) year warranty from the date of original purchase.
- Maximum optimal range for vehicle detection is 12 feet. Additional monitors may be required for driveways exceeding range.
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
