 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > Simply Automated > SAUS140T
|
UPB Single Dimmer Switch, 900W, White with Built in Timer
|
|
|
|
 Enlarge Image
|
ULTRA-RELIABLE, EASY-TO-INSTALL UPB SWITCH!
Finally there is an ultra-reliable powerline carrier home control technology that is easy to install. Using a new digital protocol communicating over the powerline, Universal Powerline Bus (UPB) technology significantly improves the reliability of control applications in the home. UPB has been proven to be greater than 99.9% reliable, so you can install it and forget about it... without any unpleasant noise issues!
The SAUS1130W Dimming Transceiver Switch with Timer provides ultra-reliable control of new and existing lighting fixtures, lamps, fans and other electrical devices. Each unit has one switch that controls a load of up to 900W, and acts as a transceiver to communicate with Universal Powerline Bus (UPB) plug-in modules, fixture modules and/or other devices to control virtually anything that can be connected to existing wiring anywhere in the home.
|
|
|
|
|
|
|
Simply Automated's 900 watt dimmer body with timer feature, which requires a single rocker faceplate (ZS11
Series, sold separately).
FEATURES:
Every switch is a dimmer, a relay switch AND a transmitter depending on how you program it.
Built-in Timer Function Automatically turns off loadRobust, trouble-free installation
Easy to retrofit...no new wires
Exceptional reliability and noise immunity
High signal strength and low frequency means UPB can communicate over very long A/C wire runs over one mile in length
Multiple keypad configurations available, with up to 4 decorator rockers on a single switch!
UPB addressing system uses 250 Unit ID's and 250 Network ID's for a total of 62,500 unique network addresses...plus a secure network password!
Reliable 2-Way digital communication. The transmitter sends a signal and listens to a response from the receiver. The transmitter will continue to re-transmit the signal up to 4 times until it recieves that response
Super-fast command-to-action time...less than 1/3 of a second
Can be used with other PLC systems such as X10 in the same house without interference
Can be used for stand-alone scene lighting control, or with a central controller
Supported by HAI Omni, Stargate, CommStar, ELK M1, Premise Home Control, HAL2000 and more
Each device can be programmed to be part of up to 15 scenes without an intelligent controller
200 dimming steps and variable fade rate from instant-on to a fade rate of up to one hour
The LED lights on the switches can be programmed to show a different color for a different load status, and a locally switched dimmer can be programmed to send a status report to the controller
Shallow switch depth allows for easier J-box installation
No home automation software is required to control UPB products. Basic programming functions are achieved using simple push buttons on the wall switches and modules. Advanced programming options require UPStart UPB Configuration Software. UPStart is a Windows-based program that is used for configuring purposes only, and requires an Interface Module to connect to a PC in the home (SAUMCDB9W.)
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
