 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > Sureaction > SU-611
|
Sure Action 1-Zone Processor for Vehicle Detection Probes
|
|
|
|
|
Package of (6) SU-111's
Handles a maximum of (1) Standard Probe (SU-P5050) or (4) ENHP Pulsors. Operating voltage is 12 VDC.
Features:
- Current draw per circuit is 15 Milliamps.
- GREEN LED
- ON - Probe is stable (Normal).
- OFF - Processor is tripped (Momentary 2 seconds).
|
|
|
|
|
|
|
|
The SU-111 and SU-313 require 30 seconds to stabilize after initial hook-up.
Sensitivity Adjustment - Adjust for minimum setting determined by walk testing (Full clockwise motion is maximum range).
About SureAction Vehicle Detection Probes
The Probes monitor the earth's magnetic field within a given space. A moving vehicle causes a disturbance in this field, inducing a small voltage pulse in a coil. The SU-P5050 can be connected to any of Sure Action's three processors ( SU-111 , SU-212 , SU-313 ).
The Directional Probe ( SU-P8000 ) allows applications requiring a different response depending on the direction a vehicle is traveling. The Directional Probe can only be used in conjunction with the SU-212 Processor.
The output pulse is much larger and more stable than competitors' probes producing a strong resistance to electronic noise. It is transmitted to a processor that can be up to one mile away. The processor further filters and amplifies the pulse, which drives an output relay for 3-4 seconds.
An optional 5-pin ribbon connector available on either the SU-313 or SU-111 processor provides easy hook-up to Sure Action's auxiliary timed relay. Applications include turning on driveway lights and gate motors.
Wiring Requirements - When using a SU-111 or SU-313 processor, use 3-conductor, 22 gauge minimum non-shielded burial cable. 5-foot lead is supplied with the SU-P5050 . Installer supplies any additional cabling up to 5,000 feet. Note: Use shielded cable if wiring is not being buried (surface run).
When using a SU-212 processor and 2 SU-P5050 probes, a 4-conductor, 22-gauge minimum non-shielded burial cable is required.
Note: Lightning can cause probe to trip if using either a SU-313 or SU-111 processor. A lightning check probe can be wired into the SU-212 processor to minimize accidental firing of the system due to lightning.
When placing the probe consider the following conditions:
1) The range of the probe will cover a driveway up to 14 ft. wide.
2) Do not bury probe within 5 ft. of power cables or transformers.
3) Do not bury probe within 14 ft. of high-powered radio transmitter towers.
4) Do not bury probe within 24 ft. of residential traffic.
5) Do not bury probe within 36 ft. of highway traffic.
6) Do not bury probe within 100 ft. of moving trains.
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
