 |
|
|
Shop > Viking > DVA-2WA
|
Viking Digital Announcer Provides 7.5 Minutes of Record Time
|
|
|
|
 Enlarge Image
|
This non-volatile announcer provides AGC (Automatic Gain Control) recordings from mic, handset, tape, CD, PC sound cart etc. Recoding can be done on-site or in a professional studio then shipped to the installation site.
Power Supply Included
Recommended speakers 25AE or 30AE
|
Applications:
|
- Promotion and music on hold
- Information on demand
- Museum and Information Displays
- Message Repeater
- Airports "Loading and unloading only..."
- Moving Sidwalks "Please stand to the right..."
- Emergency mesages over paging
|
|
|
|
|
|
|
|
|
Applications:
|
- On-hold promotion messages and background-music
- Non-volatile message repeater for:
- Museum and information displays
- Car rental "Leave the keys in the ignition..."
- Airport "Loading and unloading only..."
- Smoking "This is a non-smoking building..."
- Amusement Parks "Please keep your hands in the vehicle at all times..."
|
|
Features:
|
- 7.5 minutes of user recordable memory
- Select from user recorded messages or four pre-recorded on-hold pacifier messages
- Three playback options: on demand, continuous, and timed intervals
- Non-volatile memory (no batteries required)
- Built-in 2 watt amplifier to connect directly to speakers
- Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
- 600 ohm audio output for high wattage amplifiers
- Multiple message capabilities (total number of messages only limited to maximum record time)
- AGC (Automatic Gain Control) for trouble free recording
- Auxiliary audio (MOH) input for between message background music
- Remote trigger input for on-demand playback from a remote contact closure
- Press and hold play mode
- Status LED for record and playback indication
- Master and auxiliary input volume controls
- I.O. communications port (allows only one DVA-2WA to announce at a time)
- One year warranty
- Made in the USA
|
|
Specifications
|
- Power: 120V AC/12V DC, 500mA adapter provided
- Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
- Shipping Weight: 1.0 kg (2.2 lbs)
- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
- Frequency Response: 100-3.4KHz
- Sampling Rate: 64K (equivalent) User Message
- Length: 7.5 minutes maximum
- Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
- 600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
- Speaker Output Power: 2 watt peak
- Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
- Pre-recorded Pacifier Message Length: 30 seconds total
- Minimum Speaker Impedance: 2.66
- Ohms: (3) 8-Ohm speaker
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
Kill-A-Watt: Real-time Electric Usage and Cost Monitor
