 |
|
|
Shop > X-10 Pro > IR543
|
The X10 Mini Infrared Command Console
|
|
|
|
 Enlarge Image
|
Lets you use an infrared remote controller to transmit up to 16 X-10 IR commands to turn on lights and appliances connected to X-10 modules. It also includes buttons to control up to 8 X-10 products directly from the console, including "All Lights ON/All Units OFF" and intensity control of incandescent lighting.
|
|
|
|
|
|
|
If you own an X10 Universal remote, you will not need to use an IR543 Mini Controller to receive commands from the Remote - the Transceiver Module (PAT01) does this for you and has the added advantage of working through walls.
If however you already own some other brand of Universal remote, it might have X10 IR codes in its library, or, if it's a learning remote, you can teach it X10's IR control codes. To control X10 modules with this remote you will need to purchase the IR543. The IR543 receives X10 IR codes and retransmits them over you existing house wiring to be received by X10 modules. This lets you control lights an appliances from your existing Universal Remote (providing it has X10 IR codes in its library).
IR543 SET-UP AND OPERATING INSTRUCTIONS
|
- Plug the IR543 Command Center into any convenient I 2OVAC outlet.
- Set the Housecode dial to the same letter as your X-l0 or plug ‘n power modules.
- Set the bank switch on the IR543 for the group of modules you want to control from the IR543's keyboard (1-4 or 5-8).
To control lights and appliances from the IR543's keyboard:
|
- To turn a module on or off, press and release the corresponding number button for the Unit Code set on the module, i.e. 1, 2, 3, or 4 (or 5, 6, 7, or 8). Then press the ON button or the OFF button on the IR543's keyboard.
- To dim or brighten lights connecte4 to Lamp Modules and Wall Switch Modules, turn the module on as in step 1 above. Then press and hold the dim or bright button until the desired brightness level is reached.
- Press All Lights On to turn on ALL lights connected to Lamp Modules and Wall Switch Modules which are set to the same Housecode as the IR543. Note: this affects ALL 16 Unit Codes (not just 1-4 or 5-8).
- Press All Units Off to turn off ALL modules (including Appliance Modules) which are set to the same Housecode as the IR543. Note this affects ALL 16 Unit Codes (not just 1-4 or 5-8).
Using the Radio Shack 6-in-l Remote Control (cat. No. 15-1905):
To set up the Remote Control press the plug n power button, then press A, then B, then C followed by 167.
To control plug ‘n power modules, press the number button for the appropriate module. Then press one of the buttons labeled in blue, i.e. ON, OFF, Bright or DIM. Or press All Lights On or All Units Off.
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
